Author Topic: 71 tail panel molding (Read 1001 times)

71fish · « **on:** June 13, 2006 - 06:41:16 AM »

How does the tail ss molding came off on the 71 cuda's..

71fish · « **Reply #1 on:** June 14, 2006 - 01:36:26 PM »

Hello..

Has anyone ever taken this trim off b4? I know the 72-74 is different and unbolts from the nside.

..but hows about 70-71 tail trim??

cudagirl4406pk · « **Reply #2 on:** June 17, 2006 - 07:51:10 PM »

OUrs had clips had to pry off really easy.

michele

Topcat · « **Reply #3 on:** June 17, 2006 - 08:26:57 PM »

Take off the corner pieces first. From the inside of the trunk. Then slide the long one's off from the side. Take your time. A little WD 40 to let them slide easier (if they're sticking) helps if nesessary also.

71fish · « **Reply #4 on:** June 19, 2006 - 06:34:36 AM »

Thanks peeps! I knew you two would come through. Thanks alot. I finally got the roof sanded down.. slowly. but surely getting there.

Topcat · « **Reply #5 on:** June 19, 2006 - 07:52:47 PM »

Author Topic: 71 tail panel molding (Read 1001 times)

71fish

71 tail panel molding

71fish

Re: 71 tail panel molding

cudagirl4406pk

Re: 71 tail panel molding

Topcat

Re: 71 tail panel molding

71fish

Re: 71 tail panel molding

Topcat

Re: 71 tail panel molding