Radiator support difference

[ArcticCuda]

Is there difference between 22" and 26" radiator supports? I think there is..??..
 

I wanna replace my 22" Radiator with bigger one.

[pettybluecuda]

Just the opening is bigger, On yours you can seen were they cut it for the 26, on the left side you will see a line that runs down stamped on the sheetmetal. I have all the parts if you are in need of them.

later,
Jesse lee
cudaregistry

[ShelbyDogg]

Here you go, $95.

[dougs bs23]

do you have to change out both sides?  I've seen someone advertising on  the right side, they say its the only one you need to change?  Seems to me the shroud would get blasted if that were the case,, i dunno,,

[Challenger6pak]

Your 22" shroud is offset. When you go to the 26" it is centered.   

   
 
 

[dougs bs23]

Ah,, I see,  I'll have to look at mine and see,,, being some bozo put a 26" rad in the car I'm currently working on,, by simply drilling new holes in the existing support,, From what I remember when I pulled it out it was blocked about 2 inches or so on each side.