Anyone have a schematic for the e-brake setup on a '73 Challenger?

[Grec]

Seems I'm missing alot of the stock e-brake setup.

Looks like I'll basically need to rebuild it from the pedal to the drums.

I'm looking for a schematic that would show everything including cable-to-frame clips, cable connectors, etc.

Might just end up being time to buy a shop manual, but I figured I'd ask.

Thanks.

[Chryco Psycho]

it should have a front cable from the pedal down , 2 wheel cables , & an intermediate cable to tie the fron cable to the rear cables , you also need the traingular bracket to connect the front canble to the intermediate cable & the 2 C shaped brakets to connect each end of the intermediate cable to the 2 wheel cables & a steel hook to hold the intermediate cable to the frame in the right front , it hooks into the torsion bar cross member
 sorry no diagram handy though 

[Grec]

That should be enough to get me started on my hunt.

Thanks!

[Bullitt-]

Grec, I have the '73 Service Manual but there is no schematic so to speak, everything is delt with individualy, where would you like to start, wel upon further revue here is one.

[Alaskan_TA]

and since your are missing parts, click this link;

http://www.inlinetube.com/Brake%20Cables/Mopar%20E-body/BSH7004.htm

 

[Grec]

Bullitt/Alaskan, that's perfect!

Many thanks!