Author Topic: IS '70-74 CUDA DRIP RAIL MOLDING REPRODUCED?  (Read 2104 times)

Offline cuda496

  • Jr. Member
  • **
  • Posts: 60
IS '70-74 CUDA DRIP RAIL MOLDING REPRODUCED?
« on: August 23, 2006 - 05:07:57 AM »
i'm on a desperate search for cuda driprail molding to replace a missing rear quarter piece that was lost.  :pullinghair:

anyone know if reproduction driprail is available?

thanks for the help. 




Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: IS '70-74 CUDA DRIP RAIL MOLDING REPRODUCED?
« Reply #1 on: August 24, 2006 - 09:37:42 AM »
Too bad you didn't go to Columbus. Cuda stuff was everywhere.  I found everything  I needed till the money ran out. Monster Mopar will be in Sept. I could look for you. How much do you want to spend?

Rob
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline cuda496

  • Jr. Member
  • **
  • Posts: 60
Re: IS '70-74 CUDA DRIP RAIL MOLDING REPRODUCED?
« Reply #2 on: August 24, 2006 - 09:02:20 PM »
thanks for reply.

i live on the west coast so i couldn't make the Nats.  i really have no idea what cuda driprail molding sells for.  i rarely if ever see it for sale.  but i figured that i'd have to buy a complete set just to get that one lost piece that i need.  $100-150?.  just throwing out some $ figures.
 :dunno:
do you know if the stuff is reproduced by a company?

i checked metro parts company website and didn't see it.

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: IS '70-74 CUDA DRIP RAIL MOLDING REPRODUCED?
« Reply #3 on: August 24, 2006 - 09:40:45 PM »
I have no idea if anyone reproduces them. Take a pic of the piece that you need, then send me your cell phone number. If I see one there, I'll call you to okay the price.  Let me know which part you are talking about.

Rob


I went out and looked at my Cuda.  I'm guessing that you need the little piece that connects to the rail after the bent connector? Driver's or Passenger's side?
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline cuda496

  • Jr. Member
  • **
  • Posts: 60
Re: IS '70-74 CUDA DRIP RAIL MOLDING REPRODUCED?
« Reply #4 on: August 25, 2006 - 12:07:59 AM »
Rob
sorry i don't have a digital camera to take a pic of it.  but it's the outer chrome piece (on the drivers side) that runs diagnally along the rear quarter glass.  straight piece that's approx 12-13" right after the small 45 deg connector piece.
thanks 

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: IS '70-74 CUDA DRIP RAIL MOLDING REPRODUCED?
« Reply #5 on: August 25, 2006 - 05:27:44 AM »
Got it,  I'll look for one at MMW.

Rob
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: IS '70-74 CUDA DRIP RAIL MOLDING REPRODUCED?
« Reply #6 on: September 10, 2006 - 04:55:34 PM »
Cuda496,

I found you a pair of those trim pieces at Monster Mopar. A guy from Colorado had 2 sets and I convinced him to remove the 2 small pieces from one of the sets and just sell those to me for $30. I didn't remember which side you needed so I bought both the drivers and passenger side trim. I saw that the driver's side has a small minor ding that can be straightened and polished out. I then came home  to read that that is the side you needed.  The other side is good.
I'll sell them to you for $30 plus the shipping to your address.  Send me your address. My Paypal addy is ROBTDEL@GMAIL.COM

Rob
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0