Author Topic: Oil dipstick for 73 340  (Read 904 times)

Offline cuda-cable

  • Jr. Member
  • **
  • Posts: 198
  • MOPAR or no car
Oil dipstick for 73 340
« on: September 17, 2006 - 07:07:00 PM »
I have  a dipstick  #3870265  from  a 77 Volare 318........it  appears  to be too long ?as in  oil  shows  in excess of  full  by  fair  amount. I'm  going  to drain the oil from  my  340   and  put  in a measured  amount  with  a new filter.I've  never run this engine  so noy sure how  much  oils  in it....believe  they hold  4 qts  plus  the filter?   Is there different  lengths  of  dipsticks  on  small blocks.....if  so which  #  do I  need........thx.......




Offline 426 pentastar

  • Jr. Member
  • **
  • Posts: 175
Re: Oil dipstick for 73 340
« Reply #1 on: September 20, 2006 - 01:11:31 PM »
Small block is 5 qts.,you can order a dipstick from ur local dealer.

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: Oil dipstick for 73 340
« Reply #2 on: September 22, 2006 - 09:46:57 AM »
Different legths on some aftermarket dipsticks.   Fill it up with 4 quarts, start then shut off to fill filter, them mark the new LOW level on the stick. Add the 5th quart, then mark the new FULL mark on the stick.

Rob
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0