Author Topic: outside lower windshield trim - sealer or no sealer?  (Read 678 times)

Offline miketyler

  • Resident
  • *****
  • Posts: 2561
    • www.miketyler.net
outside lower windshield trim - sealer or no sealer?
« on: September 24, 2006 - 04:58:28 PM »
I'm putting all the goodies back together under the hood after repainting the engine bed and was wondering if there should be any sealer in between the polished metal band that covers the base of the windshield? If so, what do you use? 
« Last Edit: September 25, 2006 - 07:12:23 AM by miketyler »
72' Cuda restomod
70 Mustang Mach 1
07' Toyota Tacoma Prerunner Dbl cab in Speedway Blue!
01' Honda 1100 Shadow Sabre
96' Seadoo Challenger




Offline heminut

  • Resident
  • *****
  • Posts: 2023
  • owner of the poor man's Hemi Cuda
Re: outside lower windshield trim - sealer or no sealer?
« Reply #1 on: September 25, 2006 - 09:35:17 AM »
I've owned 2 Cudas and neither one had any kind of sealer on the piece your talking about.
1970 5.7 Hemi Cuda

Offline miketyler

  • Resident
  • *****
  • Posts: 2561
    • www.miketyler.net
Re: outside lower windshield trim - sealer or no sealer?
« Reply #2 on: September 25, 2006 - 09:55:33 AM »
cool - thanks!
72' Cuda restomod
70 Mustang Mach 1
07' Toyota Tacoma Prerunner Dbl cab in Speedway Blue!
01' Honda 1100 Shadow Sabre
96' Seadoo Challenger

Offline Challenger6pak

  • Resident
  • *****
  • Posts: 4084
Re: outside lower windshield trim - sealer or no sealer?
« Reply #3 on: September 25, 2006 - 11:11:28 AM »
It didn't have any sealer or rust preventative. Water lays in there so use Por15 or something to keep the metal sealed.  I would not seal the metal strip.  If you do and it leaks the water may only be able to escape by rusting it's way out. 
1969 Sport Satellite H code convertible, 1970 Cuda 440+6, 1970 Challenger R/T 440+6, 1970 Challenger 383 R/T auto, 1970 Challenger R/T 383 4 speed,1971 Challenger convertible.