Home
Member Rides
Forum
Sponsor Sites
Tools
Contact
News:
Home
Help
Search
Chat
Login
Register
Cuda-Challenger.com
»
Chryco's Tech Shop
»
Engine & Go Fast Goodies
(Moderator:
Chryco Psycho
) »
Carb /throttle cable hook-up.....340 Edelbrock 1406 carb
« previous
next »
Print
Pages: [
1
]
Author
Topic: Carb /throttle cable hook-up.....340 Edelbrock 1406 carb (Read 3280 times)
cuda-cable
Jr. Member
Posts: 198
MOPAR or no car
Carb /throttle cable hook-up.....340 Edelbrock 1406 carb
«
on:
September 19, 2006 - 10:17:31 PM »
Put a performer 2176 intake with a 1406 carb c/with electric choke on my 340.........4 gear car. Does anybody else have this? since need to know how you have the throttle cable hooked up. Got the mopar adapter bracket so as to attach the stock cable which I had to shorten but it appears now I need to make /or buy some funky bracket to support the cable at a point approx 2.5" behind and to the side of the carb flange. What's others out there done to make this work or do I need to get a different cable??.........thx....
Logged
Jacksboys
Sr. Resident
Posts: 5540
Here Since 08/28/06 GEORGIA
Re: Carb /throttle cable hook-up.....340 Edelbrock 1406 carb
«
Reply #1 on:
September 20, 2006 - 12:54:30 AM »
I had the same setup on my 360 before I rebuilt it, except it is an auto, so it may not work. It is a little hard to see in the photos but I used a custom made bracket, which straddled the intake runner and was held on by two intake bolts.
Logged
1971 Dodge Challenger: 360/904/3.23
Success is the maximum utilization of the ability that you have. - Zig Ziglar
Jacksboys
Sr. Resident
Posts: 5540
Here Since 08/28/06 GEORGIA
Re: Carb /throttle cable hook-up.....340 Edelbrock 1406 carb
«
Reply #2 on:
September 20, 2006 - 12:59:15 AM »
After looking at those photos again, I think I customized part of an original linkage setup for the shifting linkage. It is hard to remember, it was done this way about 9 years ago.
Logged
1971 Dodge Challenger: 360/904/3.23
Success is the maximum utilization of the ability that you have. - Zig Ziglar
426 pentastar
Jr. Member
Posts: 175
Re: Carb /throttle cable hook-up.....340 Edelbrock 1406 carb
«
Reply #3 on:
September 28, 2006 - 09:00:02 AM »
If the cable is to short simply buy a slant six cable they are longer and when using custom set-ups its the easy way to do it.As far as the bracket that bolts to the intake WWW.MOPARTSRACING.COM will sell you a tall ajustable one that will work great
Logged
Print
Pages: [
1
]
« previous
next »
Cuda-Challenger.com
»
Chryco's Tech Shop
»
Engine & Go Fast Goodies
(Moderator:
Chryco Psycho
) »
Carb /throttle cable hook-up.....340 Edelbrock 1406 carb