Author Topic: suspension height  (Read 857 times)

Offline r15303

  • Jr. Member
  • **
  • Posts: 354
suspension height
« on: September 19, 2006 - 10:53:36 PM »
I'm looking at my 70 Challenger RT 440 tonight and notice that the rear end is sitting lower than the front.  It's on level ground and no load.  How and where do I check the suspension height and what should it be?  I'm not sure if the rear is low or the front is high.  I know how to adjust the front height but how do I adjust the rear?  New leafs?
Thanks for any help
 :newbie:




Offline Jacksboys

  • Sr. Resident
  • ******
  • Posts: 5540
  • Here Since 08/28/06 GEORGIA
Re: suspension height
« Reply #1 on: September 19, 2006 - 11:57:41 PM »
New leafs are the only good way of raising the rear.  It is possible to use air shocks and add extra psi to raise the rear, but I would not suggest doing that.  Also do not get the leafs from Mopar Performance because they are known to sag after a short while.
1971 Dodge Challenger:  360/904/3.23
   
Success is the maximum utilization of the ability that you have. - Zig Ziglar

Offline basement

  • Jr. Member
  • **
  • Posts: 270
Re: suspension height
« Reply #2 on: September 22, 2006 - 08:07:38 AM »
I would not recommend the airshock route. I am in the middle of removing them and installing a standard gas charged shock cause I can't stand the ride of the airshock.

Offline r15303

  • Jr. Member
  • **
  • Posts: 354
Re: suspension height
« Reply #3 on: September 22, 2006 - 08:29:01 AM »
Looks like I'll be replacing the springs - but NOT from Mopar Perfotmance!  I have a 440 6 pack.  What springs should I use and what is a good source?   :dunno:
Thanks

Offline R/T

  • Full Member
  • ***
  • Posts: 928
  • Johnson City TN
Re: suspension height
« Reply #4 on: September 22, 2006 - 09:16:55 AM »
Espo springs are what i am going with as it seems everyone on this board has reccomended them.
http://www.espo.com/
1973 Challenger (OO/=====\OO)  440 
Hemis and Harleys
2008 Dodge Ram Big Horn Edition  5.7 Hemi

Offline Total BS

  • Full Member
  • ***
  • Posts: 742
  • '71 Carrabuda Baby!
Re: suspension height
« Reply #5 on: September 28, 2006 - 10:20:39 PM »
 :iagree: I got mine from them and I am very happy.
1971 'Cuda 383
1970 Chevelle SS LS6
1999 Durango
-New Joisey-