Author Topic: experience with the 727 Gear Vendor modification  (Read 3075 times)

Offline tactransman

  • Sr. Resident
  • ******
  • Posts: 5401
  • 1973 Challenger- Member here since April 14, 2006
Re: experience with the 727 Gear Vendor modification
« Reply #15 on: October 18, 2006 - 08:02:29 PM »
Nice! :ylsuper:
Terry-tactransman 
Torqueflite/Automatic Transmission Specialist
Union, Mo.
Give a man a fish and he eats for a day,teach him to fish and he eats for a lifetime.




Offline Ornamental

  • Full Member
  • ***
  • Posts: 918
  • Oslo, Norway
Re: experience with the 727 Gear Vendor modification
« Reply #16 on: October 18, 2006 - 11:01:46 PM »
Me like! :2thumbs:
Panther Pink '72 Challenger Rallye.
Grey '70 Challenger R/T

-There are two kinds of pedestrians: The quick and the dead.

***Per Arne***

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: experience with the 727 Gear Vendor modification
« Reply #17 on: October 19, 2006 - 01:38:01 AM »
The unit came with the electronics that have the on/off toggle switch. I'm hoping this is the correct one the NZ440R/T spoke of.



Unfortunately that is the "stock" unit. I did the same as you, I purchased the stock unit then did some research on the system and was informed by Jordan at GV that the unit was available. What I would HIGHLY suggest is waiting it out until the new units are completed. They realised the problem of the existing Auto-shift units and are now correcting and improving the system. The auto-shift unit comes with two small lights, green (for OD on) and red (for OD off). We made a custom bracket to fit snuggly on the upper right hand side of the dash cluster. I'll post a few photos of my interior switch and GV setup. It looks really tidy and factory looking.

Check out this video of the GVs guy driving the car with the stock unit. You'll notice a bad delay or "searching" when he has to kick the OD out manually between gears. It's a performance drain, sounds "messy" and is hard to get smooth if at all, every-time. The auto-shift unit takes OD out, the best modification to the GVs units by a country mile. Just some time needed to get the module electrics smooth and precise, bugs basically, being a prototype when we got it is the reason we had major problems, it still worked 80% correctly. Check out the video, it's about 7 minutes in but worth listening to for your own reference and it's also a decent tech video on the unit itself.

Video Link: http://www.gearvendors.com/videoclips/hotrodnewz_broadband.wmv

All you need to do is call them up and ask about the new modules. Put your name down on the waiting list so when they're made you get in first. They are a $450 upgrade on the stock system, so you would be $450 out of pocket and the stock electronics would become obsolete as you won't be able to use them but, I'm telling you it's worth every penny. The gear-box works with both boxes so you don't have to re-order the entire system.

Ornamental - Good decision mate, me and you are both on the waiting list. I would call up as well to get on it, not too many would know of this new module being built so the earlier you can place your order the better. Talk to Jordan, he's the man with the inside scoops and "connections" at GVs.

Fantastic looking Charger by-the-way, she'll sound great pegging 6 short ratios!! 


Regards,
Carl
NZ440R/T
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline hemi68charger

  • Jr. Member
  • **
  • Posts: 476
  • Charger Power!!
    • Houston Mopar Club Connection
Re: experience with the 727 Gear Vendor modification
« Reply #18 on: October 19, 2006 - 02:34:51 AM »
Frickin wise guy...lol

Here is a pic of my car. Always a work in progress

Ah,,, He learns quick....... lol
'69 Daytona 426 HEMI-727
'70 Superbird 440 - 4speed

Offline cudabuyer

  • Sr. Member
  • ****
  • Posts: 1230
Re: experience with the 727 Gear Vendor modification
« Reply #19 on: October 19, 2006 - 05:25:24 AM »
Nice car, have GVO with 833 still under construction, floor pan for 70 challenger has  2b modified   :working:
70 Dodge Challenger Convertible 6.1 Hemi


Offline Ornamental

  • Full Member
  • ***
  • Posts: 918
  • Oslo, Norway
Re: experience with the 727 Gear Vendor modification
« Reply #20 on: October 19, 2006 - 06:29:49 AM »
Ornamental - Good decision mate, me and you are both on the waiting list. I would call up as well to get on it, not too many would know of this new module being built so the earlier you can place your order the better. Talk to Jordan, he's the man with the inside scoops and "connections" at GVs.
I'll drop by the norwegian agent for GV when i come home in about three weeks time, and see what i can have arranged!

By then, i hope to have sorted out a little problem between me and the norwegian equivalent of the american IRS...
Those #@%&!!! made a mess of my tax-return. :pullinghair:
Panther Pink '72 Challenger Rallye.
Grey '70 Challenger R/T

-There are two kinds of pedestrians: The quick and the dead.

***Per Arne***