How hard to change tail panels?

[bb71challenger]

I have a 71 Challenger that when I bought it had 70 taillights. I changed them out but someone had butchered the hell out of the original 71 tail panel. I have a parts car with a good tail panel and I want to change the panels out before I get my car painted. There looks to be a ton of spot welds  Is it a straight forward job to change out the panels? I have access to a drill bit that is for spot welds and I have a small mig welder, will that be all I need? Thanks for any input. 

[moparclown]

You got it----Lotsa spot welds and take your time,remove the seam sealer inside the trunk pan along the tailpanel.Thought I had a pic of mine before and after but mine almost fell out due to rust.

[RUSTY Cuda]

Was one of the more pleasent metal jobs I did, lots of spot welds, i ended up cutting up the old one for easier access, it was shot anyway.
don't have any shots of the actual drilling or weldind, sorry.Rich

[bb71challenger]

Cool, thanks for the input guys! I was considering just leaving it since you cannot see it behind the taillights but I would know it is there and I finally found a tailpanel so I will change it out.