Author Topic: wheel interchangability  (Read 1717 times)

Offline moparnut

  • Resident
  • *****
  • Posts: 2410
  • Nutin like a nice Piece of Hickory"Clint Eastwood
    • My Photo's
wheel interchangability
« on: November 10, 2006 - 08:07:47 PM »
Can i go to a wrecking yard and find the right bolt pattern basic steel rims to use to roll around my projects?Which cars and what years would have the same bolt pattern as a B/E body? cordoba? or any newer(80's cars)??
thanks
70 Barracuda Gran Coupe,383-4bbl,# Match
2012 Subaru Forester
70 D100 Adventurer 383 pickup
02 F250 S'cab Powerstroke 7.3 4x4 6 speed Manual
06 Honda VTX1800S Spec 3




Alaskan_TA

  • Guest
Re: wheel interchangability
« Reply #1 on: November 10, 2006 - 08:12:11 PM »
Lots of cars had wheels that will fit. 1/2 ton Dodge trucks and vans also, well into the late seventies at least.

Barry


Offline moparnut

  • Resident
  • *****
  • Posts: 2410
  • Nutin like a nice Piece of Hickory"Clint Eastwood
    • My Photo's
Re: wheel interchangability
« Reply #2 on: November 10, 2006 - 10:05:25 PM »
thanks Barry,I'll give that a try
70 Barracuda Gran Coupe,383-4bbl,# Match
2012 Subaru Forester
70 D100 Adventurer 383 pickup
02 F250 S'cab Powerstroke 7.3 4x4 6 speed Manual
06 Honda VTX1800S Spec 3

Alaskan_TA

  • Guest
Re: wheel interchangability
« Reply #3 on: November 10, 2006 - 10:07:26 PM »
Check the C-Bodies too, most of them had 15" wheels.

Barry

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: wheel interchangability
« Reply #4 on: November 11, 2006 - 12:10:29 AM »
many furds have the same bolt pattern as well

your looking for 5x4.5" bolt pattern  :wave:
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: wheel interchangability
« Reply #5 on: November 11, 2006 - 12:18:42 AM »
many furds have the same bolt pattern as well

your looking for 5x4.5" bolt pattern  :wave:
Fords have a smaller center hole & may not be compatable
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline duodec

  • Full Member
  • ***
  • Posts: 679
Re: wheel interchangability
« Reply #6 on: November 12, 2006 - 10:36:21 AM »
A while ago one of the Mopar magazines said that many recent Jeep wheels would fit.  I don't have info on years/models, though

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: wheel interchangability
« Reply #7 on: November 12, 2006 - 12:37:41 PM »
Weird idea....  :thinkerg:

What about foreign cars?  Just another source for cheap rims at the scrap yard.

Some 5 bolt Japanese cars (Honda, Infinity) have a bolt pattern of 114.3mm which translates to 4.5".

I know the honda stuff is FWD but Infinity makes some cool rims for the G35 coupe that look very cool, IMO.

I wonder what the backspace is? 

May look cool on an older car? or  :puke: ?  I might get some flack for this one!

1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Jacksboys

  • Sr. Resident
  • ******
  • Posts: 5540
  • Here Since 08/28/06 GEORGIA
Re: wheel interchangability
« Reply #8 on: November 12, 2006 - 12:49:09 PM »
Weird idea....  :thinkerg:

What about foreign cars?  Just another source for cheap rims at the scrap yard.

Some 5 bolt Japanese cars (Honda, Infinity) have a bolt pattern of 114.3mm which translates to 4.5".

I know the honda stuff is FWD but Infinity makes some cool rims for the G35 coupe that look very cool, IMO.

I wonder what the backspace is? 

May look cool on an older car? or  :puke: ?  I might get some flack for this one!

Those might work, but many of them have a large backspacing, which may cause problems.
1971 Dodge Challenger:  360/904/3.23
   
Success is the maximum utilization of the ability that you have. - Zig Ziglar

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: wheel interchangability
« Reply #9 on: November 12, 2006 - 12:53:31 PM »
Those might work, but many of them have a large backspacing, which may cause problems.

Yeah, I agree with the backspace stuff.  I'm pretty sure the FWD cars like Accords, etc... won't work but I wonder what the backspace on the RWD cars are like.  I'll have to check it out.
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Jacksboys

  • Sr. Resident
  • ******
  • Posts: 5540
  • Here Since 08/28/06 GEORGIA
Re: wheel interchangability
« Reply #10 on: November 12, 2006 - 01:03:44 PM »
Yeah, I agree with the backspace stuff.  I'm pretty sure the FWD cars like Accords, etc... won't work but I wonder what the backspace on the RWD cars are like.  I'll have to check it out.

I am not sure about all of them, but I know some of them also have a large backspacing.
1971 Dodge Challenger:  360/904/3.23
   
Success is the maximum utilization of the ability that you have. - Zig Ziglar

Offline PlumCrazyChris

  • Jr. Member
  • **
  • Posts: 456
    • Mopar Muscle Cars of Austin
Re: wheel interchangability
« Reply #11 on: November 17, 2006 - 11:17:15 AM »
I've been looking into this myself.  I keep seeing all sorts of complete new takeoffs on Craigslist for very cheap.  I think a lot of them would look great on our cars, and according to this reference, 

http://www.discountedwheelwarehouse.com/Vehicle_Bolt_Pattern_Reference.cfm

the bolt pattern is correct, but the backspacing is WAY off,  You'd need to put some pretty big spacers on them to make them work.  The ones I thought would work best seem to be off chrysler minivans, but the new 300s look like they might work well too. 

I saw that article in one of the mags about jeep rims too.  Nice jeep rims don't seem to be as easy to find around here though.


PlumCrazyChris
Mopar Muscle Cars of Austin
Round Rock Tx
70 Challenger 5.7, A518, A/C
70 Challenger 340 convertible (Gone to Sweden)
68 Barracuda (sold it too)
www.mopar.org

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: wheel interchangability
« Reply #12 on: November 17, 2006 - 01:54:33 PM »

I saw that article in one of the mags about jeep rims too.  Nice jeep rims don't seem to be as easy to find around here though.




Thanks for the link!  :thumbsup:

I like the Jeep rims that look like aluminum and have 5 holes like Centerline wheels, or sorta like a Lambo.  One of our members, ccrach?, has a similar style.  I agree that it'll be hard to find a set iin good shape.
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: wheel interchangability
« Reply #13 on: November 17, 2006 - 04:37:06 PM »
Thanks for the link!  :thumbsup:

I like the Jeep rims that look like aluminum and have 5 holes like Centerline wheels, or sorta like a Lambo.  One of our members, ccrach?, has a similar style.  I agree that it'll be hard to find a set iin good shape.

A set in Texas taking offers.http://cgi.ebay.com/ebaymotors/JEEP-WRANGLER-WHEELS-15-X-8-6-7G_W0QQitemZ170050156626QQihZ007QQcategoryZ43955QQrdZ1QQcmdZViewItem
good looking set of American Racing http://cgi.ebay.com/ebaymotors/4-15-WHEELS-JEEP-WRANGLER-CHEROKEE-FORD-RANGER-BRONCO_W0QQitemZ290049405129QQihZ019QQcategoryZ43955QQrdZ1QQcmdZViewItem
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: wheel interchangability
« Reply #14 on: November 17, 2006 - 10:39:54 PM »
Yeah, those are the ones!  :grinyes:

Those look cool IMO.  For the money they're decently priced for what you get if you like that style.

I have like 4 different sets of rims for my car though so I  won't be seeing any new rims until I get rid of a set.

I have more sets of rims than sneakers!  :roflsmiley:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger