AAR Neon

[IUU2ROC]

I coulda swore that was 3 3/4" on the Neon. I even squinted and everything. 

I found some specs on the internet that shows the wheels should fit.

This website shows the 5 bolt Neon had 100 mm bolt pattern
http://www.sromagazine.com/shop/wheelguide.html

Dodge Neon (all) 1995-1997 (4x100mm / HPO / 12x1.5 Lug-nut / 57.10mm Bore)
Dodge Neon (all models) 1998-up (5x100mm / HPO / 12x1.5 Lug-nut / 57.10mm Bore)
Dodge Neon (5x100) 1995-up (5x100mm / HPO / 12x1.5 Lug-nut / 57.10mm Bore)

This website shows small bolt pattern Mopars were 4 inch.
http://www.alliedracingwheels.com/patternref.html

5 on 4 (101.6 mm)
'64-'69 Mopar "A" 13"
'65-'76 Mopar "A" 14"
Dodge - Aspen, Dart, Demon, Swinger (w/o discs) '63-'72
Plymouth - Barracuda, Duster, Valiant (w/o discs) '61-'74

Now I think I know everything. Well, maybe not as much as my teenagers, but almost everything. 

[DodgeFreak]

the neon and the shadow have the same bolt pattern its not a 1\4 of an inch off...its closer than that...but it is off just alittle but you can get the rim to fit on with out drilling.. the only "major" difference is the center hole for the hub its about 3\4 of an inch off...i took a die grinder to it to get it to fit on the duster...but if your putting it on the neon it won't matter.