Hemi A833 18 Spline 4 Spd

[blown74]

I have a Hemi 18 Splie A833 tranny that is in great shape. It up shifts and down shifts just fine. I pulled it out to replace the clutch with a dual disc unit. Then I got to thinking about putting in a 5 spd or GV unit. So I wanted to see how much someone would offer me for my 4spd. The numbers on thr main housing  H4 C99129   XS29L9R161774   PP8332615  0156  ON the tail housing C-99539 S82  Cover C95664Z Front bearing retainer C97621 This is the long shaft unit that came out of a challenger. Thanks for the 

[72hemi]

Where are you located. I am looking for an 18 spline for my 70cuda project?

['Cuda Hunter]

  location would help.  Some pictures would also help.  Are you willing to take it to a shipping company? 

[blown74]

Located near Baltimore, Maryland. If the price is right I'm willing to ship anywhere. Remember their is nothing wrong with this tranny to my knowledge. I pulled it out to go to a two disc hp clutch unit. It shifted just fine both up and down. Here is a pic. I'm hoping for top dollar to help pay for a 5 spd. If the tranny isn't worth enough to offset the cost of the tremec 5 spd I will just keep the 4 spd. I can post more pics if needed. Heck I'm still trying to figure out what it is worth.
Don

[72hemi]

Throw a price out there.

[JeffAARy]

I'll help speed things up.

You can buy a rebuilt 18-spline from Brewers Performance for about 2K, so a used one in unknown condition should be less than that.

The Tremec 5-speed can be had from Keisler for 3K.

[Moparal]

I offer 600

[blown74]

Probably best to go with Brewers. I'm not even sure I would sell it for less then 1500.00 I talked with Dan at Brewers. 1950.00 for a A833 with a 90 day warranty. To get one rebuilt is running about 8 weeks labor about 350.00 plus parts. I need to pull my side cover and check all the gears and make sure I have a 21 tooth 4th gear for the 2.65 ratio model trans. If its the later model trans with the 2.45 ratio Dan said he doesn't have hardly any parts. No 2,3,4 or counter gear.

[72hemi]

Passon Performance is the same, about 2k for a rebuilt 18 spline.