News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 22 to 26 rad conversion  (Read 611 times)

    Offline r15303

    • Jr. Member
    • **
    • Posts: 354
    22 to 26 rad conversion
    « on: January 22, 2007 - 06:14:46 PM »
    I just received my passenger side rad support for a 26" rad conversion on my 70 Chally but now I'm noticing that the driver rad support is wider than I expected.  The opening is 1/2" too narrow.  When I checked the driver side support on my true R/T car, there is a definite difference between the two driver side supports.  I thought replacing only the passenger side support would do the trick.  Any of you guys run into the same problem?  :clueless:
    Logged


    Offline moparnocar

    • Jr. Member
    • **
    • Posts: 285
    Re: 22 to 26 rad conversion
    « Reply #1 on: January 22, 2007 - 07:10:51 PM »
    I have a friend who ran into the same problem. Notice it was just that little bit.. so he changed both sides..
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: 22 to 26 rad conversion
    « Reply #2 on: January 22, 2007 - 10:25:03 PM »
    it basically goes frame rail to frame rail
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline r15303

    • Jr. Member
    • **
    • Posts: 354
    Re: 22 to 26 rad conversion
    « Reply #3 on: January 23, 2007 - 08:05:34 AM »
    thanks guys.  Moparnocar - where did your friend get the part for the left side?
    Logged
    Pages: [1]
    « previous next »