Author Topic: insulation and noise reduction methods  (Read 1818 times)

Offline WVUFELLA

  • Full Member
  • ***
  • Posts: 583
  • (OO/---------\OO) closest i could for a 72
insulation and noise reduction methods
« on: February 11, 2007 - 08:38:35 AM »
hey i have all the interior out of my car right now. I coated the floor boards up to the firewall. I was wondering what you all have used to keep sound out. What kind if insulation works the best. I was thinking about gettin regular carpet foam becuase it is cheap then i can cut it to the sizes i need and also add a lili extra in places where i can.  What have you all had the best luck with ??? thanks




Offline rusty dodge

  • Jr. Member
  • **
  • Posts: 298
  • 74 challenger 440-727-3:55
Re: insulation and noise reduction methods
« Reply #1 on: February 11, 2007 - 09:13:48 AM »
http://www.b-quiet.com

1st put on the Ultimate, it sticks on like dynamat. Then use the Vcomp over that, for the carpet padding.

Offline r15303

  • Jr. Member
  • **
  • Posts: 354
Re: insulation and noise reduction methods
« Reply #2 on: February 11, 2007 - 09:36:32 AM »
 :popcorn:

Offline 70RAGTOPR/T

  • Jr. Member
  • **
  • Posts: 421
Re: insulation and noise reduction methods
« Reply #3 on: February 11, 2007 - 10:58:04 AM »
I was watching Muscle Car today and they were using Hushmat.

http://www.hushmat.com/index.html

Offline heminut

  • Resident
  • *****
  • Posts: 2023
  • owner of the poor man's Hemi Cuda
Re: insulation and noise reduction methods
« Reply #4 on: February 14, 2007 - 08:23:03 PM »
Rev and Red used some stuff a guy on Ebay sells and were real happy with it, so I tried it and really liked it too! It's easy to work with and is very economical compared to stuff like Dynamat. The link below should take you to his auction. Rev and Red's website has pics of the install in their Challenger.

http://cgi.ebay.com/ebaymotors/Auto-Insulation-Car-Truck-Hot-Rat-Street-Rod-Van-RV_W0QQitemZ330087931177QQihZ014QQcategoryZ46094QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
1970 5.7 Hemi Cuda

Offline WVUFELLA

  • Full Member
  • ***
  • Posts: 583
  • (OO/---------\OO) closest i could for a 72
Re: insulation and noise reduction methods
« Reply #5 on: February 15, 2007 - 07:06:44 AM »
does anyone have rev and reds website address?? thanks

Offline Winston

  • Jr. Member
  • **
  • Posts: 308
Re: insulation and noise reduction methods
« Reply #6 on: February 15, 2007 - 07:30:35 AM »
Hey WVU,
This link is taken from the door panel info thread.  You can start there and go through to the pics you'd like to see.
http://www.ridesthatrock.com/html/plastics.html

Hope this helps.

Offline Rev-It-Up

  • Global Moderator
  • Permanent Resident
  • *****
  • Posts: 10601
  • Member Since 2/20/02
Re: insulation and noise reduction methods
« Reply #7 on: February 15, 2007 - 08:36:32 AM »
We bought more of that same stuff to put in the duster.  It is really easy to use and has been a great heat and sound insulation for the challenger.  Pretty cost effective too, in comparison to the big name brands.

Our website is www.ridesthatrock.com 
Rev-It-Up                                                             Yes, I'm a girl!