This what I need?

[Stacked440]

http://store.summitracing.com/partdetail.asp?autofilter=1&part=CTF%2DDF269739&N=700+115&autoview=sku
Summit has this clutch and pressure plate, I have a 23 spline 10.5 inch flywheel, anyone use these or hear anything about them? I've heard centerforce is a good alternative to Hays for pedal pressure and grip.

[Chryco Psycho]

if you have a 10.5" set up I would up grade to a McLeod B&B or B&B long style 10.95 clutch
 Stay away from the C force clutches

[Stacked440]

Might I ask why to stay away from C-force?

[Chryco Psycho]

first you need to remove the overcenter spring on the pedal , even after removing it the pedalmay stay on the floor when you shift
 I have seen the discs come apart with very few miles on them
 Basically overrated Junk

[Stacked440]

It looks like mcleod won't sell clutch kits without the flywheel   Instead of a 300 some dollar kit, its an 800 dollar something kit.  I need to know whats the best company for pedal pressure and trouble free operation.

[Chryco Psycho]

Mcleod sells every part separatly , I buy them constantly

[Stacked440]

Summit only lists an 11 inch mcleod 23 spline clutch disc?  Where do you buy them from?

[Chryco Psycho]

The 10.95 PP is part #360953
the disc 23 pline is part #260821

[Stacked440]

Here are some pics of my flywheel, does this look right, and how do you measure your flywheel for the clutch?

[Chryco Psycho]

you should be just over 11" inside the bolt holes where the pressure plate mounts

[IMNCARN82]

I had to put a new clutch in my car right after i got it.   Went with the Mcleod.  Street clutch.  slightly lighter spring tension on the pedal. I like it,easier to drive,still launches hard....

[moper]

I havn't broken a Centerforce yet. But I have ripped the centers from the stock replacement discs on several occasions. I dont like Rams, havent used Mcleod.