Author Topic: Clutch Fork spring  (Read 854 times)

Offline gichy

  • Jr. Member
  • **
  • Posts: 281
Clutch Fork spring
« on: March 16, 2007 - 11:16:34 AM »
Were does the Clutch Fork spring go?
One end hooks to the fork, then where does the other end go?

Does it hook up to the Z bar or the bell housing

Thanks
1974 Barracuda, 340cid, 4 speed OD !!




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Clutch Fork spring
« Reply #1 on: March 16, 2007 - 08:16:32 PM »
there is a notch under the starter where the spring hooks into the belhousing , it leaves a small gap between the engine block & bel  & a small notch in the clutch fork that the spring hooks into , the spring should be essentially straight forward to the belhousing

Challenger - You`ll wish You Hadn`t

Alaskan_TA

  • Guest
Re: Clutch Fork spring
« Reply #2 on: March 16, 2007 - 08:53:03 PM »
This may help as well;


Offline gichy

  • Jr. Member
  • **
  • Posts: 281
Re: Clutch Fork spring
« Reply #3 on: March 17, 2007 - 01:13:09 PM »
Thanks guys
I will have a look tonight

Thats the 1st picture I've seen, all my books only show one end of the spring
1974 Barracuda, 340cid, 4 speed OD !!