Author Topic: poly LCA bushing ?  (Read 675 times)

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
poly LCA bushing ?
« on: March 25, 2007 - 08:08:12 AM »
Installed new energy suspension polyurethane LCA bushing & have a 1/8"-1/4" gap from front of bushing to shaft flange. Is this normal or a symptom of needing to trim the strut bushing down to lt it come forward? 
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: poly LCA bushing ?
« Reply #1 on: March 25, 2007 - 11:12:26 AM »
sounds norml to me , there is usually a gap between the bushing the flange on the pivot pin

Challenger - You`ll wish You Hadn`t

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: poly LCA bushing ?
« Reply #2 on: March 25, 2007 - 11:24:07 AM »
sounds norml to me , there is usually a gap between the bushing the flange on the pivot pin

Thanks CP .....that's a relief
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!