Author Topic: Finally a little time to myself...tire question?  (Read 1233 times)

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Finally a little time to myself...tire question?
« on: March 26, 2007 - 06:32:12 PM »
The white and brown and yellow trucks were very busy keeping my dirt road dusty last week. After a very hectic week all the way through today, I got to open the ups/fedex/DHL boxes.

My 6pk breather assembly was in one, my 4 spd carpet was another, my legendary seat covers was yet another, then :wow: My Ralley wheel packages came in. In 6 boxes. 15x7s x4,  4 trim rings, 4 light argent center caps, the screws for them,the left and rt hand lugs and valve stems.

I wanna go with T/A radials, so what tires will work on the front 15x7's ? I had 225x70x15's on my challenger, but they were just too big for me. I don't want them that wide and maybe an inch shorter. The back I could use some suggestions for the 15x7 too. I had 15x8's and 275 60's on them but they are too wide for 7" rims.
I just want a clean look.. And want to get them tomorrow, if I can...Any suggestions....ALAN




Offline Rare_T_A

  • Resident
  • *****
  • Posts: 3916
    • Freiss Family Mopar Site
Re: Finally a little time to myself...tire question?
« Reply #1 on: March 27, 2007 - 03:43:39 AM »
When I run the radials I have 235X60X15s on the front and 275X60X15s on the rear. They fill the wheel wells up great.
'09 Challenger R/T  5.7 HEMI Auto
'70Challenger T/A 340 727

Fargo, N. Dak.
My web Site:  http://freiss.co.nr

My Flikr Page: http://www.flickr.com/photos/102813164@N04/

I was born with nothing and I still have most of it left!

Offline cudabuyer

  • Sr. Member
  • ****
  • Posts: 1230
Re: Finally a little time to myself...tire question?
« Reply #2 on: March 27, 2007 - 05:06:01 AM »
 :iagree:  i believe that was the tire sizes prior to changing to the aftermarket wheels, and they looked great - filled out the wheel wells just fine  :2thumbs:
70 Dodge Challenger Convertible 6.1 Hemi


Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Finally a little time to myself...tire question?
« Reply #3 on: March 27, 2007 - 07:33:21 AM »
I know the challenger has more wheel well room then the barracuda. So is a 235 60 15  a shorter tire?  I am going to look today.  thanks for the replies...ALAN

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Finally a little time to myself...tire question?
« Reply #4 on: March 27, 2007 - 08:01:51 AM »
225/70r-15 is about 27.4" tall

235/60r-15 is about 26.1" tall.  It's a little wider I think being a 60 series tire.

I used this tire calculator: http://www.onlineconversion.com/tire_size_conversion.htm
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Finally a little time to myself...tire question?
« Reply #5 on: March 27, 2007 - 02:02:35 PM »
Well, I just got back from buying 275x60x15 t/a radials for the back  110 each and have 235x60x15 t/a radials coming in tomorrow. A lot of t/a radials are on national back order. They had 2 275's left. I started to buy them too, but I had to buy and mount 4 new tires on the truck today too. I went and dropped off my rear seat and legendary cover at the upholstery shop also. Tomorrow I take him in the front buckets and foam and covers. 200 bucks to install all the upholstery. I thought that was a very good deal. He is even painting the springs with semi gloss black interior paint.

Now, bumpers, chrome tips, front windshield and a black dash pad, and I will begin to enjoy my car and start some small cruising.  It has came a long ways from a hull to now.

Offline HP2

  • Resident
  • *****
  • Posts: 4478
Re: Finally a little time to myself...tire question?
« Reply #6 on: March 27, 2007 - 04:43:31 PM »
295/50x15 rear and 235/60x15 front.

Next project is fitting either Goodyear or Hoosier 26.5x12x15 on 10" rims rear and 26.1x10x15 on 8" rims on the front.

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Finally a little time to myself...tire question?
« Reply #7 on: March 27, 2007 - 05:49:51 PM »
Well, I couldnt resist, so I mounted the 275x60's by hand on my new rims and put them on the back of the barracuda. They fit really good. I will mount the fronts tomorrow when I get the tires in the morning. But I am thinking I like what I see.

Offline ksierens

  • Sr. Member
  • ****
  • Posts: 1408
    • 70 Challenger Resurrection
Re: Finally a little time to myself...tire question?
« Reply #8 on: March 29, 2007 - 12:37:16 PM »
Are those on a 7" rim?  I am just curious if the tread area of the tire looks bowed out.  The BFG web site says that that tire should fit at a minimum a 7 1/2" rim.
1970 Triple Black Challenger R/T  440 Six Pack - 4 Speed - 3.55 Dana
Kurt - SE Michigan