Author Topic: Anyone used tti's 'cuda exhaust tips and have pictures of it? (Read 2079 times)

widing'cuda · « **on:** May 31, 2007 - 01:25:52 PM »

Anyone used tti's 'cuda exhaust tips and have pictures of it?
I see that there 'cuda exhaust tips have a bracket on them that makes them fit
the tip hangers without a muffler by the gas tank. I was thing of getting them and using them on a none tti exhaust system. But I think they are rather expensive. So I was hoping to see some picture of them. As the one on tti web site aren't that good

Chryco Psycho · « **Reply #1 on:** May 31, 2007 - 11:31:07 PM »

the hanger is welded to the pipe as is the tip when you order the whole system , the tip seperatly wil not have the hanger bracket

widing'cuda · « **Reply #2 on:** June 01, 2007 - 01:17:44 PM »

Ok, they have a Slip-on clamp design as well. But it's $307!!!! And If they don't have the bracket they are not worth it...

matt63 · « **Reply #3 on:** June 06, 2007 - 11:54:20 AM »

I ordered TTI tips separately and they came with the brackets and were slip on. Perhaps they are available with and without them.

widing'cuda · « **Reply #4 on:** June 07, 2007 - 10:03:22 AM »

Quote from: matt63 on June 06, 2007 - 11:54:20 AM

I ordered TTI tips separately and they came with the brackets and were slip on. Perhaps they are available with and without them.

Got any pictures of them?

matt63 · « **Reply #5 on:** June 08, 2007 - 12:03:37 PM »

I'll get some this weekend. The installation is not quite as nice as I would like but it's due to a bent up valance.

widing'cuda · « **Reply #6 on:** June 08, 2007 - 01:44:26 PM »

Quote from: matt63 on June 08, 2007 - 12:03:37 PM

I'll get some this weekend. The installation is not quite as nice as I would like but it's due to a bent up valance.

Thanks matt63

matt63 · « **Reply #7 on:** June 09, 2007 - 07:50:21 AM »

Quote from: matt63 on June 06, 2007 - 11:54:20 AM

I ordered TTI tips separately and they came with the brackets and were slip on. Perhaps they are available with and without them.

I have to correct my statements here. After looking under the car I realized that the brackets are part of the tailpipes and not welded to the tips. I wish I had bought them welded onto the tailpipes as they were difficult to weld on with the exhaust system installed

. They are also available as a slip on clamp design.

widing'cuda · « **Reply #8 on:** June 09, 2007 - 11:05:19 AM »

Quote from: matt63 on June 09, 2007 - 07:50:21 AM

I have to correct my statements here. After looking under the car I realized that the brackets are part of the tailpipes and not welded to the tips. I wish I had bought them welded onto the tailpipes as they were difficult to weld on with the exhaust system installed . They are also available as a slip on clamp design.

Ok, thanks anyway

Author Topic: Anyone used tti's 'cuda exhaust tips and have pictures of it? (Read 2079 times)

widing'cuda

Anyone used tti's 'cuda exhaust tips and have pictures of it?

Chryco Psycho

Re: Anyone used tti's 'cuda exhaust tips and have pictures of it?

widing'cuda

Re: Anyone used tti's 'cuda exhaust tips and have pictures of it?

matt63

Re: Anyone used tti's 'cuda exhaust tips and have pictures of it?

widing'cuda

Re: Anyone used tti's 'cuda exhaust tips and have pictures of it?

matt63

Re: Anyone used tti's 'cuda exhaust tips and have pictures of it?

widing'cuda

Re: Anyone used tti's 'cuda exhaust tips and have pictures of it?

matt63

Re: Anyone used tti's 'cuda exhaust tips and have pictures of it?

widing'cuda

Re: Anyone used tti's 'cuda exhaust tips and have pictures of it?