News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Can I put a 3 speaker dash pad on a center speaker frame? Diff?  (Read 609 times)

    Offline EvilTwinATX

    • Full Member
    • ***
    • Posts: 866
    Can I put a 3 speaker dash pad on a center speaker frame? Diff?
    « on: September 24, 2007 - 07:45:16 PM »
    I am about to order a new dash pad and am thinking I might want to order a 3 speaker pad so I can mount so extra speakers up front...
    Question: are the dash frames different? if so, can I just cut out the speaker holes to mount some 3'' speakers or tweeters?

     :stirpot:
    Logged


    Offline ntstlgl1970

    • Resident
    • *****
    • Posts: 2204
    • T a c o c a t
    Re: Can I put a 3 speaker dash pad on a center speaker frame? Diff?
    « Reply #1 on: September 24, 2007 - 07:59:40 PM »
    they are the same, take a look in the frame and you will see the cutouts for the speakers already there, might have to drill the holes for the screws though. If you use a more modern speaker with a larger magnet, you might have to open the holes up a little bit for them to fit right
    Logged
    70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

    Offline EvilTwinATX

    • Full Member
    • ***
    • Posts: 866
    Re: Can I put a 3 speaker dash pad on a center speaker frame? Diff?
    « Reply #2 on: September 24, 2007 - 08:17:48 PM »
    sweet ... thanks!
    Logged

    Offline ntstlgl1970

    • Resident
    • *****
    • Posts: 2204
    • T a c o c a t
    Re: Can I put a 3 speaker dash pad on a center speaker frame? Diff?
    « Reply #3 on: September 24, 2007 - 10:23:46 PM »
    No Problem, here are pics just for reference
    Logged
    70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....
    Pages: [1]
    « previous next »