Cuda tail panel paint ?

[72cudaguy]

Does anyone have any info on the correct paint ie, shade, texture etc, to use on the tail panel of a '72 Cuda.  I've seen many different things out there at the shows and just looking to get it right. Thanks for the input!   - 72Cudaguy

[cudagirl4406pk]

We used black satin from marhyde sell it at pepboys and advance auto about 8 dollars a can really does nice job.

michele

[72hemi]

I have the PPG paint at my parents house. I will get that number tomorrow and post it for you.

[71340RT]

I bought the correct Organosol black in PPG for my 70 Cuda tail panel. The number I have is in Concept and is DCC 9355. The mixing ratio is 6 parts DCC 2 parts DT reducer and 1 part DCX 61 hardner. This is very durable but remember to wear your respirator as this stuff is some nasty smelling stuff that will make you sick without one.

[72cudaguy]

Thanks for the input everybody, 71340RT that looks like the info I need, thanks alot  -- '72 Cudaguy

[Moparal]

That is the same number and mix instructions I got to.  And I had just got done pricing a half gallon mixture to finish painting my car for the m46 code blackout. it was 217.12 tax and all.  #dcc9355   and do not use any clear after you finish.

6 parts paint
2 parts reducer
1 part hardener
no clear
1/2 gallon  $217.12

[72hemi]

Thats the number.

[mrbill426]

Does anyone have any info on the correct paint ie, shade, texture etc, to use on the tail panel of a '72 Cuda.  I've seen many different things out there at the shows and just looking to get it right. Thanks for the input!   - 72Cudaguy

Totally Auto sells Organisol in a spray can.

http://www.totallyautoinc.com/paints.html

 

[FY1Cuda]

We used the Totally Auto organisol and it turned out really nice--plus it is a lot easier than buying all the stuff you need to do it with the PPG auto paint and then having to clean the gun afterward.

[farmboy70]

PPG has a lacquer and Concept formula for the 9355 organisol paint. But the lacquer is the only one with the texture additive. The concept doe's not.
Dave

[fishn4cuda]

If you're after the correct look and texture, I would use the laquer formulas. Totally auto is close but IMO looks like crap.