News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Cuda Tail Panel Pic?  (Read 963 times)

    Offline 73cudakid

    • Jr. Member
    • **
    • Posts: 96
    Cuda Tail Panel Pic?
    « on: January 16, 2008 - 01:22:46 PM »
    Anybody have a pic of where the tail panel meets up with the trunk floor for a cuda? I have a previous owner "questionable repair" that i would like to fix since i have the 1/4s off and new gutters coming in. Inside and outside pics would be greatly appreciated. Just not sure how the trunk floor meets up to the tail panel.
    Thanks Dave
    Logged


    Offline RUSTY Cuda

    • Sr. Member
    • ****
    • Posts: 1949
    • One big step foward!
    Re: Cuda Tail Panel Pic?
    « Reply #1 on: January 16, 2008 - 01:50:59 PM »
    K, try again the orig trunk floor comes up to a flange at the back & it's spot welded to it.
    If you put in 2 piece trunk floor repro they do not have the lip & end short of the tail panel, about where my patches begin. Rich.
    « Last Edit: January 16, 2008 - 01:53:01 PM by RUSTY Cuda »
    Logged

    Offline 73cudakid

    • Jr. Member
    • **
    • Posts: 96
    Re: Cuda Tail Panel Pic?
    « Reply #2 on: January 18, 2008 - 10:40:53 AM »
    Is that vertical leg where the tail panel gets spot welded on visible from the outside of the car or is it inside the trunk area? Also whats the aproximate height of the leg. Thanks in advance.
    Logged

    Offline RUSTY Cuda

    • Sr. Member
    • ****
    • Posts: 1949
    • One big step foward!
    Re: Cuda Tail Panel Pic?
    « Reply #3 on: January 18, 2008 - 05:29:08 PM »
    It's about 3/4" to an 1" hi & the tail panel goes inside of that, here's a test fit of the panel setting in there.
    Logged
    Pages: [1]
    « previous next »