News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Nippondenso Alt conversion  (Read 1029 times)

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Nippondenso Alt conversion
    « on: October 12, 2007 - 11:48:13 AM »
    the lt come with a 3 wire plug on the rear , a 12v switched wire attached to the blue 12v  wire & the red 12V exciter wire , can these 2 wires be connected together , if not where do I connect the exciter wire to
    Thanks
    Logged

    Challenger - You`ll wish You Hadn`t


    Offline 70RT/SE

    • Jr. Member
    • **
    • Posts: 37
    • I'm a llama!
    Re: Nippondenso Alt conversion
    « Reply #1 on: October 12, 2007 - 09:50:37 PM »
    It needs to be connected to 12v reference source. There is a article on Mad electrical on remote sensing.....http://www.madelectrical.com/electricaltech/remotevoltagesensing.shtml

    I can't remember how I wired mine up...... think I used a 12v source under the dash. I will check and let you know.
    « Last Edit: October 12, 2007 - 09:55:00 PM by 70RT/SE »
    Logged

    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: Nippondenso Alt conversion
    « Reply #2 on: October 12, 2007 - 11:27:16 PM »
    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Nippondenso Alt conversion
    « Reply #3 on: October 13, 2007 - 03:03:42 AM »
    that is what I needed , the conversion instructions included with the kit are usless
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »