Author Topic: What is this bracket  (Read 992 times)

Offline trouble

  • Jr. Member
  • **
  • Posts: 243
What is this bracket
« on: November 09, 2007 - 06:19:28 PM »
Can someone tell me what this bracket is for?
It's got two bolts through it,and there is also one on the other side.
« Last Edit: November 09, 2007 - 06:21:20 PM by trouble »




Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: What is this bracket
« Reply #1 on: November 09, 2007 - 06:33:52 PM »
I believe they were called towing brackets.  :screwy: I got 'em too. They seem kind of useless.



  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline trouble

  • Jr. Member
  • **
  • Posts: 243
Re: What is this bracket
« Reply #2 on: November 09, 2007 - 06:37:58 PM »
Sometimes when I ask questions I feel like a total idiot.I would never of figured it out.
I am mounting my heat shields for my exhaust, and I thought they would be in the way.

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: What is this bracket
« Reply #3 on: November 09, 2007 - 06:49:52 PM »
They were used to chain the cars to the transpor trucks.  When I built my trailer hitch years ago. I welded some diagonals to those brackets.  My hitch was so strong that I towed a trailer with a race car with my Chally to the Columbus Nationals a few years in a row.
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline vinb

  • Resident
  • *****
  • Posts: 2163
Re: What is this bracket
« Reply #4 on: November 09, 2007 - 06:50:45 PM »
They are shipping brackets, they hook the chains during the original shipping. Will not be in the way of your new heat shields or anything. If you do take them off , wrap them up and put away for the future if you plan on selling the car.
Did you get your spare alternator?? I'll be coming up to Paramus tomorrow..Have some things to take care off...

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: What is this bracket
« Reply #5 on: November 09, 2007 - 07:15:14 PM »
those are factory aftermarket electric fuel pump mounts :D :bigsmile:
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline trouble

  • Jr. Member
  • **
  • Posts: 243
Re: What is this bracket
« Reply #6 on: November 10, 2007 - 12:20:57 PM »
Has anyone mounted the mufflers without useing the heat shields?The shields are up againts the tow brackets when I push the mufflers up. Also I was told to mount the exhaust system from back to front.Aren't you suppose to start from the front of the car?
I cut all the exhaust system off the car,and now I'm not sure if everything is going to line up.

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: What is this bracket
« Reply #7 on: November 10, 2007 - 12:52:36 PM »
My factory heat shields are mounted to the inside frame rail. I run both rear mufflers and don't have a problem with the tow brackets.

Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0