Cuda Parts.....if you live in Ontario,Canada

[cuda-cable]

If you live in Ontario(so we don't have the exchange/border things to contend with) I have some surplus parts from my project to turn to $$ so as to complete my project. these include ......power steering pump/unit, auto trans linkage/shifter, trunk lid, rallye hood, two 1970 challenger buckets in need of TLC, valve covers, sreering wheel, 2.76 gear set, holley street dominator manifold, passenger door panel and a pair of rear panels, 600 Holley carb in need of rebuild, assorted bumperettes, 73 washer reservoir, rear defroster/blower ass'y, and some other assorted stuff. If  there is someone close to me in Ontario (near Owen Sound) I'd make a deal on the whole lot.....you pick up...........thx....

[Slotts]

How far is that from Markham?
Slotts

[ChallengerHK]

Man, you are way up the road.  I was thinking that I still know some folks in Detroit who might go across the river for me, but you're like 6 hours away from them.

[CUDA JAS]

I am looking for a few things, but not likely the whole lot.

Are you interested in seperating the lot?

Jas

[JayBee]

I'd be interested in the trunk lid if it's in good shape and a '70 style with all the cutouts (spoiler, AAR spoiler & luggage rack).

John

[cuda-cable]

Trunklid needs some work along the rear lip and has no holes in it. I'm about 2hrs and a bit from Markem, need to go north of Mt Forest on highway 6 to #4then about 20 min west. I'll split it up, just like to get these things to folks that have a need, and free up some garage space.........thx.....cc

[CUDA JAS]

I am looking for the following for my 74 Cuda:

727 dust sheild
UCA bump stops
Negative battery cable
Manual steering column
leaf springs
some various rubber seals for the gas tank
strut bars
 
Driver quality stuff is fine.

What are the vale covers for? Stock?
Any 70 bumperets

Please let me know what you have.  I can certainly pick it up if that works.

Thx

Jason

[Alaskan_TA]

If you have not done so yet....

Can you please take a look inside both of the Challenger seat backs for broadcast sheets and let me know what you find?

Thanks,
Barry

[cuda-cable]

Cuda Jas........of your list only the valve covers which are stock from a 73 '340'......will check for the seats today for broad cast shts.....cc

[cuda-cable]

Alaskan TA........checked the seats.........no broadcast sheets