Follow up to Intermittant Charging

[422STROKER]

http://www.cuda-challenger.com/cc/index.php?topic=39384.0

As a follow up to my question, I swapped the VR and cleaned the ground up a bit on the firewall, one of the bolts wouldn't really tighten up so I may weld that one shut this winter and redrill.  But, I swapped the new VR in and it was charging fine.  I'll have to keep an eye on it.

I also picked up a new Alternator for the motor swap this winter either way...  I'll put that in when the time comes.  Came with a printout for 65A.  I'll need to add a bypass at that time since the Aftermarket Stereo and Amp will add to the existing loads.


Thanks to all those who helped!

Tom

[GoodysGotaCuda]

sounds good, hope all goes well with it!
-Mike

[JayBee]

Thanks for the update, the previous thread may just help someone else out. You know, keeping a known good one in the glove box ain't a bad idea.