Front bumper guard HELP !!!

[js27]

Anybody out there have a 70 Chally with front bumper guards??? MY car originally had them but were missing when I bought it. I bought two sets of them and neither set fits. The bumper is the original and was in perfect shape except I had it rechromed so I know it wasn't bent at all. The guards fit the bumper contour but the bolt hole doesn't line up.
Do they come with a bolt from the back of the bumper to the guard or does the guard have a stud in them that goes through the bumper and bracket and gets a nut???
I could drill out the bumper and bracket to make them work but I really don't want to do that or think I should have to. ANYBODY who has a 70 with front gaurds please check them out and HELP me out !!!
Thanks,
JS27

[attachment deleted by admin]

[JS27N0B]

Bolt comes through from the backside.

I had a bumper that was rechromed and could not put my gaurds on.
Got another bumper and no problems now. I would suspect that they "straightened" your bumper for you.

My guards fit the contour of the bumper VERY tightly and actually squeezed the bumper as I tightened them into position.
let me know if you need a close-up pic:)

[js27]

Hey JS27NOB,
Thanks for the info. I would love to see some close up photos, it would be a big help. Also if you could get a lenght measurment. I have one set thats 7 3/4 inches long and the other set is 8 inches long. Go Figure ?
Thanks Again,
JS27
AL

[JS27N0B]

try and get it for you tomorrow

[js27]

Hey JS27NOB,

Thanks and is there a way to tell left from right???
There is no part numbers on these darn things.

You can e-mail me direct at
al67gtx@aol.com

Thanks Again
JS27

[JS27N0B]

Here is one on the car

[attachment deleted by admin]

[JS27N0B]

Here are my spares, Challenger one on the left, Dart on the right..you can see they are similar. They actually use the same rubber cushion

I thing I have two left side Dart ones??
Should be an L or a R stamped into the nut retaining bracket welded into the guard. If it has been rusty you may not see this anymore.
The bottom is tapered to match the taper of the bumper.
Hope this helps all.

[attachment deleted by admin]