Author Topic: 11" Brake parts needed (Read 1345 times)

Winston · « **on:** January 06, 2008 - 06:47:41 PM »

Hey all,
I am looking for some front brake parts - these parts are for the 11" size, and I am looking for both sides. I need anchor plates, overtravel spring and cable, adjust lever and spring, adjuster screw assembly. If anyone can help, I'd appreciate it. Thanks for looking!

moparmussel · « **Reply #1 on:** January 07, 2008 - 06:36:15 AM »

i have a new set of shoes bought for 68 gtx never used, you interested? e mail me at deves@metrocast.net thanks,mark.

Winston · « **Reply #2 on:** January 07, 2008 - 08:15:20 AM »

mark,

thanks for replying, but i already bought all the shoes, drums, spring kit, etc. for some reason, when i had my car restored, all of the stuff that's supposed to be reuseable were lost. not really sure if these pieces that i need are available at your local parts store. i'm going to call napa this afternoon and check. again, i appreciate the response.

winston

backtobasics · « **Reply #3 on:** January 07, 2008 - 02:02:44 PM »

If you buy a set of discs, you can have my COMPLETE 11" brake system off my Challenger....

sleepychallenger · « **Reply #4 on:** January 07, 2008 - 02:21:53 PM »

not sure what the anchor plate is but i think i have all of that since i changed my front drums to disc.

Winston · « **Reply #5 on:** January 07, 2008 - 09:31:23 PM »

Hey sleepy, the anchor plate is the flat little diamond-shaped metal piece that goes on the top dow where the two large springs hook on. I have managed to gather everything I need for it except the anchor plates. I wish I had a digital pic of one, but I don't currently. If you are willing to sell just those pieces (one for each side), I'd be interested. Take care and thanks for all who've replied.

Winston

sleepychallenger · « **Reply #6 on:** January 07, 2008 - 09:32:38 PM »

i will take a look and let you know.

Winston · « **Reply #7 on:** January 07, 2008 - 09:43:57 PM »

Thanks so much sleepy!

sleepychallenger · « **Reply #8 on:** January 07, 2008 - 09:48:41 PM »

i just tried pming you. i am going to take some pics now and post them if you wanna hang around for a couple of min.

sleepychallenger · « **Reply #9 on:** January 07, 2008 - 10:00:21 PM »

do you see it here? if so, yes i have two

Winston · « **Reply #10 on:** January 07, 2008 - 11:05:17 PM »

hey sleepy,
i sent you a PM. my inbox was 230% full

so i guess i was unable to receive any PM's. thanks for taking the pics and helping out! look forward to hearing from you.

winston

sleepychallenger · « **Reply #11 on:** January 07, 2008 - 11:16:11 PM »

not a problem. glad to help. now i just have to sell the rest of the set ups.

Winston · « **Reply #12 on:** February 17, 2008 - 02:22:16 PM »

Hey everybody
Anyone have any 11" brake drums they want to sell? I have a significantly large broken piece on the edge of the inner sleeve and cannot use it again. I'll either buy new ones, but it looks like the center section is not included with the purchase of the new ones, so I'd rather find some original ones to clean up if they are in good shape with regular wear.

Any suggestions? Should I go ahead and buy the new ones? Are the center sections that hold the bearings and lug studs even available? Help!

sleepychallenger · « **Reply #13 on:** February 17, 2008 - 10:42:45 PM »

i have two used ones, not sure what shipping would be since they are super heavy. the center area should just be the bering races.

Winston · « **Reply #14 on:** February 17, 2008 - 10:57:01 PM »

Hey man, how have you been doing? I actually tried to PM you earlier about this to see if you had them!

They definitely are heavy, but do you think they'd be much heavier than a wheel? If you are willing to part with them, how about PMing me, and we'll square out the details. I'd also like to see a couple pics if you have any handy. I hope all has been well with you!
Winston