Author Topic: Rear springs.  (Read 759 times)

Offline flores_57

  • Jr. Member
  • **
  • Posts: 222
Rear springs.
« on: April 07, 2008 - 12:04:14 PM »
With out sounding like a dumb a@@ :dupe: can any one please post some instructions on how to replace the rear leaf springs on a 73' Cuda. I'd like to do as much work as I can. I'm using replacement springs from Mopar. Thanks :worshippy
My lugnuts require more TQ than your ricer produces!!!




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Rear springs.
« Reply #1 on: April 07, 2008 - 12:19:32 PM »
jack up the car , put stands under the fram & diff , cut the old U bolts off , you do not want to reuse them , unbolt the rear shackles & pry them out of the rear frame & spring eye . Undo the 4 9/16 bolts that hold the front hanger in place & remove the springs from the car , , undo the large front cross bolt , hopefully the bolt is not siezed intot eh front spring eye bushing , you may need to heat the bolt to get it out or worse cut or grind the head off the bolt to get the spring out of the hanger , you may need to replace the bolt with a grade 8 fine thread bolt , reverse the proceedure to assemble

Challenger - You`ll wish You Hadn`t

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Rear springs.
« Reply #2 on: April 07, 2008 - 06:35:41 PM »
If your springs are the originals, like mine were... I took the easy way out and bought new brackets for the front, along with the long bolt. I also bought new rear shackles after boogering my old ones up trying to get them apart.  :eek4: This is kind of a dirty job, but you can do it.  :thumbsup:


  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.