Need pics of MP Subframe connectors Installed!

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Need pics of MP Subframe connectors Installed!  (Read 1838 times)

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Need pics of MP Subframe connectors Installed!
    « on: April 12, 2008 - 04:32:22 PM »
    OK, I spent some time trying to figure out how these things go in...  I couldn't find any pics in the search feature, so I'm hoping someone has pics of these.

    Just don't seem to fit right.

    Tom :1zhelp:

    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear


    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #1 on: April 12, 2008 - 04:52:33 PM »
     :popcorn:
    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD

    Offline FJ5_440

    • Full Member
    • ***
    • Posts: 879
    • Wisconsin
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #2 on: April 12, 2008 - 06:09:35 PM »
    Can you post a photo of them?  It may be that you were sent the wrong ones.  I happened to me once.
    Logged
    ** Shane **

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #3 on: April 12, 2008 - 06:28:58 PM »
    This is the best I could get today I will jack up the car Sunday and get a better angle if you need one.
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #4 on: April 12, 2008 - 07:19:58 PM »
    OK DB that's what mine look like, you added the bit to close up the end of it?  I thought they would sit all the way up so they could be "bolted in"LOL

    I would take some better pics too though. :1zhelp:

    Tom

    Here is a couple pics of the ones I got.
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #5 on: April 13, 2008 - 05:46:23 PM »
    Tom
    Yes I did, I dint want the open ends.
    You just need to trim up the ends to get the bar to sit up tight next to the frame.
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #6 on: April 13, 2008 - 10:39:01 PM »
    Thanks DB's,  I got it that far up but thought they should go higher.  But they hit the floorpan under the rear footwell area anyways.  Not sure what I'm going to do yet. :villagers:

    Bolt in mass :bigsmile:

    Tom :walkaway:
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #7 on: April 14, 2008 - 07:36:05 AM »
    Can you send them back and go get the better ones?  :thinkerg:
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #8 on: April 14, 2008 - 07:42:27 AM »
    I cut them as per the instructions already.

    Tom :misbehaving:

    I might just fit them up and tack them in and have a buddy put some good welds on them.

    Tom ;)
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline hemiken

    • Sr. Resident
    • ******
    • Posts: 8785
    • Hemi-fied Mopar in Australia
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #9 on: April 14, 2008 - 08:34:07 AM »
    Quote from: 72challorange on April 14, 2008 - 07:42:27 AM
    I cut them as per the instructions already.

    Tom :misbehaving:

    I might just fit them up and tack them in and have a buddy put some good welds on them.

    Tom ;)
    Hey Tom,

    I would be more than glad to weld them in old mate.   But i fear you will want to drive long before Winter comes again.  It is a bit of a hike from hear. :cooldancing:
    Logged
    1970 Barracuda   (O^--^===|===^--^O)
    1971 Barracuda   (O O {]{]{]|[}[}[} O O)
    1970 Challenger  (O O [======R/T=] O O)
    1971 Challenger  (O O ===== ===== O O)
    I pay homage to the best Mopars ever built.

    Offline IMNCARN82

    • Resident
    • *****
    • Posts: 3547
    • LeDZeP
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #10 on: April 14, 2008 - 09:25:51 AM »
    Those are the ones on this car.I wish they sat higher. They look much nicer trimmed. 
    Logged
    '73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
    '69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
    13' Challenger R/T BlacktoP  6spd. (OO________OO)
    71' Demon
    75' Duster
    87' Conquest TSI
    56' Plaza
    Boulder CO
    Robert    "cuda bob"

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #11 on: April 14, 2008 - 12:25:54 PM »
    Quote from: hemiken on April 14, 2008 - 08:34:07 AM
    Hey Tom,

    I would be more than glad to weld them in old mate.   But i fear you will want to drive long before Winter comes again.  It is a bit of a hike from hear. :cooldancing:

    I would have to do some major modifications to drive to you. :roflsmiley:

    Yeah IMCARN82, I think I might just fit them up and stop by a welder to make sure they are in good.  I can spark it up a bit, but since it is structural, I would hate to have them pop off from a bad bead.LOL :misbehaving:

    Tom
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline 500Stroker

    • Full Member
    • ***
    • Posts: 550
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #12 on: April 15, 2008 - 09:11:45 PM »
    Here's mine







    « Last Edit: April 15, 2008 - 09:16:28 PM by 500Stroker »
    Logged

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #13 on: April 15, 2008 - 09:18:26 PM »
    Perfect 500 Stroker!  I thought I messed them up somehow.  I got 1 side in and called it quits cause my engine was ready to pick up.LOL  I'll get at the other side this weekend hopefully.

    Thanks for the pics. :picture:

    Tom

    To complicate matters my rear sway bar is mounted right in the same spot.  I may just cut an access hole in the bottom to be able to torque the bolt when necessary. :dunno:
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline 500Stroker

    • Full Member
    • ***
    • Posts: 550
    Re: Need pics of MP Subframe connectors Installed!
    « Reply #14 on: April 15, 2008 - 10:21:37 PM »
    I was really confused when we put mine in a few years ago.  Came with no directions at all.  Had no Idea we had to cut them to make them fit.  :pullinghair:
    Logged
    Pages: [1]
    « previous next »