Author Topic: 70 TA Challenger hood pins (Read 985 times)

Challenger7405 · « **on:** April 20, 2008 - 09:13:58 PM »

Does anyone know what lacation the hood pin plates that go on a 70 TA Challenger are? Is it quare as standing infront of the car or is it like a diamond. I'm talking about what location the mounting hole are.

Also, are the plates just rivited on?

Thanks, Eric

Alaskan_TA · « **Reply #1 on:** April 20, 2008 - 09:39:42 PM »

The rivet holes are parrallel to the hood sides;

Challenger7405 · « **Reply #2 on:** April 20, 2008 - 09:40:21 PM »

Perfect...Thanks!

Alaskan_TA · « **Reply #3 on:** April 20, 2008 - 09:41:12 PM »

Well, close to parallel anyway.

hemiken · « **Reply #4 on:** April 20, 2008 - 09:43:17 PM »

Hey Barry,

I think if you ran a sraight edge across the hood along the screw holes they would be parralel with each other

Alaskan_TA · « **Reply #5 on:** April 20, 2008 - 09:44:58 PM »

Maybe, if the workers at Hamtramck were not stoned that day.

hemiken · « **Reply #6 on:** April 20, 2008 - 09:46:00 PM »

your crazy

Alaskan_TA · « **Reply #7 on:** April 20, 2008 - 09:51:47 PM »

True enough. Thanks for noticing.

Author Topic: 70 TA Challenger hood pins (Read 985 times)

Challenger7405

70 TA Challenger hood pins

Alaskan_TA

Re: 70 TA Challenger hood pins

Challenger7405

Re: 70 TA Challenger hood pins

Alaskan_TA

Re: 70 TA Challenger hood pins

hemiken

Re: 70 TA Challenger hood pins

Alaskan_TA

Re: 70 TA Challenger hood pins

hemiken

Re: 70 TA Challenger hood pins

Alaskan_TA

Re: 70 TA Challenger hood pins