Author Topic: Got an offer, - what is it..???  (Read 1276 times)

Offline cowboy

  • Sr. Member
  • ****
  • Posts: 1615
  • Denmark
    • CowboyCars.dk
Got an offer, - what is it..???
« on: May 07, 2008 - 05:43:15 PM »
-
My rear is very noicy, got an offer on this, from ??? a Polara, - maybe..???

What is it..???

MoPar's for Cruizin, Racing & Pro-touring: www.CowboyCars.dk

1930 Plymouth Hot Rod wannabe - 1957 DeSoto Fireflite Sportsman - 1967 RaceCuda  -  1968 Barracuda  -  1971 Challenger R/T Conv.





Offline hemiken

  • Sr. Resident
  • ******
  • Posts: 8785
  • Hemi-fied Mopar in Australia
Re: Got an offer, - what is it..???
« Reply #1 on: May 07, 2008 - 05:46:29 PM »
I think that is what is called a 7 1/4 diff, was used mainly for low horse power vehicles.  You want an 8 3/4 at the very least. :2thumbs:
1970 Barracuda   (O^--^===|===^--^O)
1971 Barracuda   (O O {]{]{]|[}[}[} O O)
1970 Challenger  (O O [======R/T=] O O)
1971 Challenger  (O O ===== ===== O O)
I pay homage to the best Mopars ever built.

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Got an offer, - what is it..???
« Reply #2 on: May 07, 2008 - 08:13:30 PM »
Thats an 8 1/4" diff, its okay for very mild small blocks in my opinion. I wouldn't run one even with my 318 however.

-Mike
« Last Edit: May 07, 2008 - 08:15:55 PM by GoodysGotaCuda »
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline Jacksboys

  • Sr. Resident
  • ******
  • Posts: 5540
  • Here Since 08/28/06 GEORGIA
Re: Got an offer, - what is it..???
« Reply #3 on: May 08, 2008 - 01:54:23 AM »
I heard that you can build up an 8 1/4" diff to withstand some power.  I would not try to race with one, but a mild street machine (350hp or less) in a light car (3200 or less) should be fine.


I had a 7 1/4 in my Challenger for several years and it handled a beating and never had a problem.  I now have an 8 3/4.
« Last Edit: May 08, 2008 - 02:10:40 AM by jacksboys »
1971 Dodge Challenger:  360/904/3.23
   
Success is the maximum utilization of the ability that you have. - Zig Ziglar

Offline 4THECHALLENGE

  • Jr. Member
  • **
  • Posts: 374
Re: Got an offer, - what is it..???
« Reply #4 on: May 08, 2008 - 02:07:46 AM »
i have a 8 and 34 is that good or bad? sorry not trying to jijack the thread just new and curious
thanks

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Got an offer, - what is it..???
« Reply #5 on: May 08, 2008 - 02:26:42 AM »
8 3/4 are tough , basically second only to the DAna , they are very strong for all but serious racing with slicks

Challenger - You`ll wish You Hadn`t

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: Got an offer, - what is it..???
« Reply #6 on: May 10, 2008 - 02:30:35 AM »
-
My rear is very noicy, got an offer on this, from ??? a Polara, - maybe..???


I would keep your original rear-end and get the gears replaced or get a complete center section out of another car. Do not install the other Polara one.
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline wally426ci

  • Sr. Resident
  • ******
  • Posts: 5095
    • maryland mopars
Re: Got an offer, - what is it..???
« Reply #7 on: May 10, 2008 - 08:43:28 AM »
Maybe adjust your bearing play? mine was noisy at one time, until i replaced a bearing and adjusted it the right way.  :cheers:
{OOI====I====IOO}
      '71 Challenger
      [O[]=====[]O]
      '68 D100