Author Topic: Cant remove key  (Read 2654 times)

Offline MDMoparDude

  • Jr. Member
  • **
  • Posts: 156
Cant remove key
« on: May 04, 2008 - 10:31:34 PM »
I have a 70 Chally,  the ignition key has become stuck.  I cannot turn it back far enough to remove it from the ignition.  It will turn to the start, and on position.  Is there anything this could be besides needing a new ignition switch. 




Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Cant remove key
« Reply #1 on: May 04, 2008 - 10:32:44 PM »
I think You need to rotate the lower column.  I think this one has come up before.

Tom :2thumbs: :smilielol:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Cant remove key
« Reply #2 on: May 04, 2008 - 10:33:27 PM »
4-speed? you got it in reverse?
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Alaskan_TA

  • Guest
Re: Cant remove key
« Reply #3 on: May 04, 2008 - 10:36:47 PM »
It is part of the 1970 only lockout feature. I think it is explained in the owners manual?

Offline MDMoparDude

  • Jr. Member
  • **
  • Posts: 156
Re: Cant remove key
« Reply #4 on: May 04, 2008 - 10:39:51 PM »
I have tried pushing, pulling, everything I can think of, will have to check it again next weekend.  This could be an idiot error I admit..........

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Cant remove key
« Reply #5 on: May 05, 2008 - 03:41:53 AM »
as above rotate the lower column , 70 only was not spring loaded to return & was driven by linkage from the trans , with the rod disconnected the column will rotate trapping the key

Challenger - You`ll wish You Hadn`t

Offline MDMoparDude

  • Jr. Member
  • **
  • Posts: 156
Re: Cant remove key
« Reply #6 on: May 05, 2008 - 05:38:37 PM »
sorry, dont understand what you are trying to tell me chryco?????

Offline BadJoey

  • Full Member
  • ***
  • Posts: 982
Re: Cant remove key
« Reply #7 on: May 05, 2008 - 08:11:55 PM »
Chryco speaks the truth . I had the same problem and didn't try it for a few days (sounded too easy) . The key came right out  :jumping:

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Cant remove key
« Reply #8 on: May 05, 2008 - 08:27:34 PM »
just before the column tapers down to go under the dash there is a larger diameter housing , grab it with both hands & rotate it [clockwise I think ] to the end of it`s rotation , you should now be able to remove the key

Challenger - You`ll wish You Hadn`t

Offline MDMoparDude

  • Jr. Member
  • **
  • Posts: 156
Re: Cant remove key
« Reply #9 on: May 05, 2008 - 09:38:28 PM »
Gotcha Chryco, will try that this weekend.

Offline MDMoparDude

  • Jr. Member
  • **
  • Posts: 156
Re: Cant remove key
« Reply #10 on: May 11, 2008 - 11:35:17 AM »
That worked like a champ Chryco, thank you.  Question now is, how do I keep that from happening again?

Offline ksierens

  • Sr. Member
  • ****
  • Posts: 1408
    • 70 Challenger Resurrection
Re: Cant remove key
« Reply #11 on: May 11, 2008 - 03:05:51 PM »
Only sure fire way is to re-install the reverse lockout linkage.  Mega Parts sells it I think.

Of course I never had it in mine either since it had headers when I bought it. You just get used to twisting the column when the key won't come out.
« Last Edit: May 12, 2008 - 06:54:42 PM by ksierens »
1970 Triple Black Challenger R/T  440 Six Pack - 4 Speed - 3.55 Dana
Kurt - SE Michigan

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Cant remove key
« Reply #12 on: May 12, 2008 - 02:03:01 AM »
doesn`t really matter know that you can easily solve it

Challenger - You`ll wish You Hadn`t

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: Cant remove key
« Reply #13 on: May 14, 2008 - 04:20:38 PM »
how do I keep that from happening again?

Get a small spring and hook it to the arm that sticks out of the column, in the engine compartment. hook it to something that will keep the arm pulled down.
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0