News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Edelbrock RPM manifold - hood clearance question  (Read 1824 times)

    Offline mrob

    • Jr. Member
    • **
    • Posts: 200
    Edelbrock RPM manifold - hood clearance question
    « on: July 01, 2008 - 09:37:59 AM »
    I'm thinking about putting an Edelbrock Performer RPM intake on my 71 383 Challenger R/T. I want to keep the stock dual snorkel air cleaner and I'm wondering if anyone has done this before? Has there been any hood clearance problem? I know that the Performer RPM is taller than the stock intake.
    Any responses are appreciated. Thanks!
    Logged


    Offline matt63

    • Sr. Member
    • ****
    • Posts: 1855
    Re: Edelbrock RPM manifold - hood clearance question
    « Reply #1 on: July 01, 2008 - 11:30:11 AM »
    Don't know if this helps but I have a 360/408 in the 'Cuda with the bulge hood and I have to run a drop air cleaner base and low profile open top K&N to fit.  The RPM Air Gap is a tall intake.

    Logged
    Matt in Edmonton

    '68 Valiant
    '73 Cuda 340 4 speed (408) SOLD

    Offline cudasteve72

    • Jr. Member
    • **
    • Posts: 319
    Re: Edelbrock RPM manifold - hood clearance question
    « Reply #2 on: July 01, 2008 - 11:43:25 AM »
    We have the cheaper performance plus version of that intake on the 340 with a demon carb and the stock air cleaner did fit.  very close thou keep an eye on carb stud if you do it.
    Logged
    1972 Cuda Custom 70 clone  416 stroker 481/531 hp/
    2006 Grand Cherokee SRT8 (daily)
    1970 Challenger convertible 340 (Dad's)
    1967 Dart gt slant six all original 40,000 miles driver but needs restoration (Brother's)
    2011 Jeep Grand Cherokee (wife's)

    Offline vinb

    • Resident
    • *****
    • Posts: 2163
    Re: Edelbrock RPM manifold - hood clearance question
    « Reply #3 on: July 01, 2008 - 04:30:11 PM »
    Another way to find out is go to Carlisle in a week or so and see what everybody is using...
    Bring your note book..  :2thumbs:
    Logged

    Offline todd383

    • Jr. Member
    • **
    • Posts: 300
    • I'm a llama!
    Re: Edelbrock RPM manifold - hood clearance question
    « Reply #4 on: July 02, 2008 - 09:31:09 PM »
    If u have a hood insulation pad , it will wear a hole in it, other than that , it will fit!!!!!
    Logged
    Pages: [1]
    « previous next »