Rocker molding on 70 R/T SE

[1970RTSE]

Was rocker molding standard on the R/T SE Challenger?  The car is a 440/auto and appears to have a majority of its original paint.  However, it looks like there is evidence of holes welded up along the rocker panel and a coat of paint covering it.  The paint almost appears to be rattle can or crappy spray gun as its flaking and not very thick.  Bad prep too.  I was surmising that a previous owner tried removing the rocker trim and did a quick cosmetic job to improve the looks.  Would the rocker molding be on the broadcast sheet?  Which code?

[hemiken]

Look for M25 on your broadcast sheet it will be sill moldings

[AMXguy]

My R/T SE has just about every option they had but no rocker molding. you would think that would have been part of the SE package but it wasn't.

[Chryco Psycho]

I agree , the rocker molding was Not part of the SE pkg

[1970RTSE]

OK, no rocker moldings came on the car.  After further inspection I only see 2 holes that were welded up.  On my BS, I have M21 - Drip rail, M26 - Wheel lip, M31 - Belt, And M83 , but can't read the description(my scan is too blurry here).  Anyone know what M83 is?

[hemiken]

M83 is rear bumper gaurds