Would a Shaker hood work with this 6 pack tunnel ram intake?

[hemidude426ci]

Just wondering if any of you guys have ever ran this intake with a shaker hood, I doubt it would work, but I noticed that my shaker doesn't stick out far enough just on stock intake alone. How much taller would this set up be anyway?  http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34198&viewitem=&item=130246271143&_trksid=p3907.m29

[73Chally]

This can be done, but it is a bit of work.  My buddy did the exact thing on his Cuda using the same intake, but it took a lot of work and fiberglass.  The bubble sits up a lot higher, so a stock one will not fit.  You either have to make your own bubble or cut up a repro.

[ladman]

This will give you some idea about how high up my carbs are above my stock hood.

[hemidude426ci]

Wow ok, thats a bit too high. Thanks for the info guys.

[craigsmytcudas]

look to your left and there it is on a cuda .also you can go to huls auto works .com and see it up closer .its a cool intake , i also ran one on a 69 rr with a factory lift off hood .the tunnel ram in the other post is not even close .c 

[nqkjw]

I've got one of them i'm setting up for my 69 cuda.
Just got the linkages sorted so it is happening although slowly.