Author Topic: Flowmaster rattle  (Read 752 times)

Offline mikerallye

  • Jr. Member
  • **
  • Posts: 321
Flowmaster rattle
« on: August 20, 2008 - 12:14:54 AM »
I have 40 series flowmasters behind headers, and when I got on it today, I heard the left one make a nasty rattle inside the muffler. They have about 2500 miles on them. Is this common. Only does it when I get on it hard.  :burnout:




nivvy

  • Guest
Re: Flowmaster rattle
« Reply #1 on: August 20, 2008 - 12:17:07 AM »
may be bouncing off the bottom of the car / floor pans etc.............  :working:

Offline Moparal

  • Permanent Resident
  • *******
  • Posts: 13085
Re: Flowmaster rattle
« Reply #2 on: August 20, 2008 - 12:24:30 AM »
Sounds like a divider has broken loose at a weld

Offline loco340cuda

  • Full Member
  • ***
  • Posts: 819
Re: Flowmaster rattle
« Reply #3 on: August 20, 2008 - 12:56:59 AM »
Sounds like a divider has broken loose at a weld
:iagree:
1970 Cuda 340 4-speed - now stroked to 416ci (SOLD)
2017 Mustang Shelby GT350

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Flowmaster rattle
« Reply #4 on: August 20, 2008 - 03:34:05 PM »
Sounds like a divider has broken loose at a weld

 :iagree:

I broke one loose after my last trip to the dragway, didn't have any backfires either.  First thing the muffler shop asked.

Tom

They replaced in no charge.
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline wally426ci

  • Sr. Resident
  • ******
  • Posts: 5095
    • maryland mopars
Re: Flowmaster rattle
« Reply #5 on: August 20, 2008 - 05:04:11 PM »
My divider (welded rod seperating both pipes) broke loose and i drove like that for a whole season thinking i needed mufflers, turned out to be that. 

:woohoo:

check it out!  :working:
{OOI====I====IOO}
      '71 Challenger
      [O[]=====[]O]
      '68 D100