Author Topic: spring new or old  (Read 938 times)

Offline 300

  • Jr. Member
  • **
  • Posts: 284
  • 69 chevelle,67chevelle , 70 barracuda
spring new or old
« on: September 26, 2008 - 10:10:46 PM »
Hi. I,m working on a 70 cuda. Is it best to get new rear spings or just get the old ones re arched, Thanks




Offline ChallengerHK

  • Sr. Resident
  • ******
  • Posts: 7338
  • I'm working on it - No, really
Re: spring new or old
« Reply #1 on: September 26, 2008 - 10:40:20 PM »
My vote is new. 30-40 year old metal just has to lose something over the years.


"She'll make point five past light speed. She may not look like much, but she's got it where it counts, and I've made a lot of special modifications myself."

- Han Solo, Star Wars

Advice Thread - Taking Pictures Of Cars

Offline 73Chally

  • Resident
  • *****
  • Posts: 2381
Re: spring new or old
« Reply #2 on: September 27, 2008 - 08:09:28 AM »
Just to confuse you I would go the other way, sort of.  My father-in-law recently bought a set of new MP XHD rear springs for his 66 Satellite, and they sat lower than the stock 40 year old springs, so he ditched those and had a local shop rebuild the originals.  They just took everything off but the main spring. and added new leafs.  They came with exactly the ride height he had specified.  If you do go with new, though, STAY AWAY FROM MOPAR PERFORMANCE SPRINGS, unless you are going with Super Stock, because you will be disappointed.  There is a thread on here from earlier this month that gets into those details.  Espo is one of the better new spring sources.

Offline 300

  • Jr. Member
  • **
  • Posts: 284
  • 69 chevelle,67chevelle , 70 barracuda
Re: spring new or old
« Reply #3 on: September 27, 2008 - 08:52:42 AM »
Thanks  Thats why i asked. I was told that new  (could) be higher or lower  just by a friend not a spring guy ?

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: spring new or old
« Reply #4 on: September 27, 2008 - 08:57:04 AM »
Yeah the MP springs are stiff but low.  Kind of good if you want to get the car to sit on the tires a bit.

Tom


By tdavist at 2008-06-26
« Last Edit: September 27, 2008 - 08:58:39 AM by 72challorange »
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: spring new or old
« Reply #5 on: September 27, 2008 - 09:00:32 AM »
These are the MP XHD springs with a 26" tire.

Tom

After 2 yrs


By tdavist, shot with DSC-P72 at 2008-04-30
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline 73Chally

  • Resident
  • *****
  • Posts: 2381
Re: spring new or old
« Reply #6 on: September 27, 2008 - 09:16:09 AM »
Tom - You're dead on about stiff but riding low.  I put a set of the XHD on my 73 last year, and the thing is rock solid, but I had to go back to the air shocks to get the height that I wanted.  I'm going to be going with a 29" tire (hopefully for Christmas), and I need to lift the butt some (the car's too).  After I'm done paying for all the really want stuff, if there is anf cash left over I'm going to get a set of custom springs made.

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: spring new or old
« Reply #7 on: September 27, 2008 - 09:40:03 AM »
I was able to fit the 29" tire in there but it was only a 255 not sure if a 275 would fit in there.  I had to jack up the car by the framerail to fit it hough, wouldn't go in when I had it up by the differential.

Tom


By tdavist, shot with DSC-P72 at 2008-09-01

By tdavist, shot with DSC-P72 at 2008-09-01
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear