Pistol Grip -- Bezel -- Pics

[cjm]

Does anybody have any pics of the bezel that goes on top of the boot (H) on the pistol grip. 70 cuda...  I want to paint mine but I want to get the color as close as possible....

Thanks...........

[FM3V6M]

its chrome, don't paint it

[cjm]

No, not that one...    It is the one that goes on top of the boot and has the letter "H" cut out...  The one that is currenty on the car has a little surface rust on it....  i was planning on sanding the rust off and touching it up with a little paint, but I wanted to be as close as possible....

thanks again..........

Here's a pic from a few month's ago...  I put a yellow circle on the piece in question.... (Cell phone camera)..

[heminut]

That would be a Hurst aftermarket boot, not a factory part.

[cjm]

Was there anything on top of a stock boot? Did Hurst make the pistol grip for Mopar?
I had this car since 82 and I honestly thought that the boot was stock for all this time...  You learn something new everyday...................

[heminut]

The stock boot was just black rubber with the trim ring FM3 posted. There was a stamped metal ring that screwed to the floor with 4 bent over tabs that the trim ring bolted to, the trim ring didn't bolt directly to the floor. Yes, Hurst made the pistol grip shifter for Mopar.

[cjm]

thanks for the info....      I'm probably going to keep it anyway since the boot is good shape...  and just paint the "H"...