Author Topic: 1970 R/T Clone....whats it worth?  (Read 2240 times)

Offline Killer_Mopar

  • Sr. Member
  • ****
  • Posts: 1886
1970 R/T Clone....whats it worth?
« on: October 03, 2008 - 10:00:29 PM »
Well my father and I were discussing the possibility of selling his car earlier and he wanted to know what he could expect to get, so I figured who better to ask then the best board on the net. Before I get to the details, the reason he wants to sell it is because he simply doesnt use the car....I honestly dont think he put 250 miles on the car this year.

Now for the details, the car started life as a 318/3-speed car....it now has a mildly built 340/4-speed and is cloned into an R/T. When he bought it, the owner told us the engine was rebuilt and when I added a cam I saw that the cam bearings were in great condition, the bores had no scores, and the car runs great so I believe him. All the following parts were added to the engine when the cam was installed (~2000 miles): 484 purpleshaft kit (cam, lifters, springs), pushrods, timing chain, torker intake, 670 holley carb, MP distributor, HP oil pump. The engine breathes through a set of hooker ceramic headers going into a 2" stainless steel magnaflow x-pipe system (has a nice growl, but not loud). The trans is an 23 spline 833 which was rebuilt last year and has a few hundred miles on it. Overall, the car runs great but has a few issues that keep it from perfect. First, there is a slight hesitation from a stop (haven't spent much time trying to fix it). Second, there is a slow leak from the front of the trans (front bearing). Third, in my opinion the car is in desperate need of lower gears....it has 3.23s in it now and would really wake up with a set of 3.91s.

As for the the body, it is in great condition and the last owner was the one who did the "resto" on it (~5 yrs old). He welded in new floor & trunk pans, passenger 1/4 panel, patched everything else up included parts of the frame (with thick plate), and added a set of frame connectors. The car was repainted 3 years ago for a couple reasons but basically because the R/T hood & valance were added and mostly because our bodyman ran his escort into my dad's garage door and owed him money. There are no issues with the body except 2 paint chips; 1 on the top corner (toward the headlight bucket) on the drivers fender and the other on body line on the passenger door, both of the chips have been touched up and are not noticeable unless pointed out...just wanted to be honest. As for the interior, the seats were redone 3 years ago and are in perfect condition. The dash is a 71+ rallye dash and is in good condition, the tach isn't accurate so the car currently has a summit tach tied to the steering column. The carpet is in good condition, as are the door panels. The console could use a good makeover. Lastly, the shifter boot and bezel are absent as a Mr. Gasket shifter is on the car(awesome shifter) and it doesnt work with the boot.

Other things I want to quickly note: the wheels & tires have under 2000 miles on them, the front shocks were replaced 4 months ago, the car has air shocks in the rear, the heater was bypassed, and there isnt a shroud on the car (never gets anywhere near overheating), and the car has all the R/T stuff (rallye dash, hood, valance, and front sway). I can keep trying to describe and nitpick the car, but a picture is worth a thousand words so attached are a couple pictures for you to decide for yourself. Thanks
70 Challenger R/T SE - The never-ending project........




Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: 1970 R/T Clone....whats it worth?
« Reply #1 on: October 04, 2008 - 12:42:24 AM »
IMO, it should bring in the $20,000 to $25,000 range depending on how well the resto and metal fixes were done.  It has a lot going for it, however, it also needs some work to be turn key.

zgood luck with they sell.



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline Aussie Challenger

  • Resident
  • *****
  • Posts: 3407
  • In Kansas loaded for Drive to West Coast.
Re: 1970 R/T Clone....whats it worth?
« Reply #2 on: October 06, 2008 - 12:10:31 AM »
  The last pic of under the car shows the exhaust to be a "H" not an "X". Great looking car, will make somebody very happy.   :jumping:   :woohoo:
Dave

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: 1970 R/T Clone....whats it worth?
« Reply #3 on: October 06, 2008 - 05:01:13 AM »
IMO, it should bring in the $20,000 to $25,000 range depending on how well the resto and metal fixes were done.  It has a lot going for it, however, it also needs some work to be turn key.



    :iagree:


That's the price range that popped into my head.

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

sleepychallenger

  • Guest
Re: 1970 R/T Clone....whats it worth?
« Reply #4 on: October 06, 2008 - 06:00:27 AM »
is it just me or does it look like it sits really high up?

Offline cudaguy71

  • Jr. Member
  • **
  • Posts: 193
Re: 1970 R/T Clone....whats it worth?
« Reply #5 on: October 06, 2008 - 06:51:28 AM »
is it just me or does it look like it sits really high up?

 :iagree:  I see air-shocks in the last pic...
1973 'Cuda Project
1971 'Cuda Project
1998 Dodge Ram 1500
2003 Dodge Dakota Sport
1979 Plymouth Arrow

Offline Rare_T_A

  • Resident
  • *****
  • Posts: 3916
    • Freiss Family Mopar Site
Re: 1970 R/T Clone....whats it worth?
« Reply #6 on: October 08, 2008 - 08:59:32 AM »
Let's not forget it's an Ebody folks! You just don't see them on every street corner for sale. I'm thinking like 25-30K. The things that really hold it back is heater-AC not hooked up, no fan shroud  and my worst pet-peeve is those Kmart battery clamps and really needs a shifter.  Sorry,Just my observations.     :2cents:
'09 Challenger R/T  5.7 HEMI Auto
'70Challenger T/A 340 727

Fargo, N. Dak.
My web Site:  http://freiss.co.nr

My Flikr Page: http://www.flickr.com/photos/102813164@N04/

I was born with nothing and I still have most of it left!

Offline Killer_Mopar

  • Sr. Member
  • ****
  • Posts: 1886
Re: 1970 R/T Clone....whats it worth?
« Reply #7 on: October 08, 2008 - 09:22:37 AM »
Thankyou everyone for your input :worshippy My father was figuring on the lower end of your estimates, so I think he'll be pleased to hear he can probably get what he wants (and maybe even more). When I get a chance to detail it and tie up some of the loose ends, it will probably be up for sale officially. My father and I have both been real busy...so it might be months.

is it just me or does it look like it sits really high up?

The rear has air shocks, but I think the front should sit a little lower....I tried to convince my father to loosen the t-bars, but he likes it the way it sits now.

  The last pic of under the car shows the exhaust to be a "H" not an "X".

Its an X-pipe system, just the camera angle makes it look like an H-pipe....I had to take a double-take at the picture myself after you pointed it out. :lol:
70 Challenger R/T SE - The never-ending project........

Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: 1970 R/T Clone....whats it worth?
« Reply #8 on: October 08, 2008 - 09:29:48 AM »
There was on ebay about 2 weeks ago a 70 challenger factory 340 4 speed car non numbers matching sell for I believe it was 32k, so I would say that this one is probably worth around 20k since it was a 318 car, not quite as nice as the one on ebay and the crappy economy.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline Aussie Challenger

  • Resident
  • *****
  • Posts: 3407
  • In Kansas loaded for Drive to West Coast.
Re: 1970 R/T Clone....whats it worth?
« Reply #9 on: October 09, 2008 - 08:51:57 AM »
 

Its an X-pipe system, just the camera angle makes it look like an H-pipe....I had to take a double-take at the picture myself after you pointed it out. :lol:

Still a great looking car, don't sell it cheap.   :woohoo:
Dave

Offline plumcrazy704406

  • Full Member
  • ***
  • Posts: 732
Re: 1970 R/T Clone....whats it worth?
« Reply #10 on: October 11, 2008 - 06:16:49 AM »
if it's as nice up close, 20-25

 :canada:
This thought may not be politically correct, but is an opinion offered. It may be correct? or it may be wrong? It is not designed to appease those needing shelter from the real world.