proportioning valve?

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: proportioning valve?  (Read 925 times)

    Offline Beck

    • Full Member
    • ***
    • Posts: 555
      • BECK KUSTOMS
    proportioning valve?
    « on: December 23, 2008 - 01:46:22 PM »
    hey guys i got a quick question,
    would my 73 barracuda have an adjustable proportioning valve?
    my rear drums are locking up too easily under braking
    cheers,
    aaron
    Logged


    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: proportioning valve?
    « Reply #1 on: December 23, 2008 - 02:04:55 PM »
    Not from the factory Aaron

    Could be the ajusters are too tight on the rear  :dunno:

    A leaky wheel cylinder maybe  :clueless:

    Did it just start doing that?
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline Changin Gears

    • Sr. Member
    • ****
    • Posts: 1011
    Re: proportioning valve?
    « Reply #2 on: December 23, 2008 - 02:19:23 PM »
    They all do that stock.  2 different fixes 1) put an adjustable valve in the rear line or 2) replace the rear wheel cylinders with ones that have smaller diameter pistons (mid '70's half ton truck).  Sometimes need both.
    Logged


    The goal never changes - Stop the 60' timer with your back tires

    Offline Beck

    • Full Member
    • ***
    • Posts: 555
      • BECK KUSTOMS
    Re: proportioning valve?
    « Reply #3 on: December 23, 2008 - 02:29:50 PM »
    it's done it to some degree the whole time i've had the car, but more apparent since i just did some brake work (new hoses, lines, master cyl etc.   the old master cylinder was faulty, not generating pressure to the rear circuit).
    how do you adjust out the drums? could this solve the problem of the drums grabbing too hard? at least untill i can get a proportioning valve into the rear line
    « Last Edit: December 23, 2008 - 02:32:33 PM by aaron beck »
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: proportioning valve?
    « Reply #4 on: December 23, 2008 - 03:44:58 PM »
    adusting the brakes shoes makes no difference other than the pedal goes lower before the brakes work , you need to install a different / adjustable valve
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Beck

    • Full Member
    • ***
    • Posts: 555
      • BECK KUSTOMS
    Re: proportioning valve?
    « Reply #5 on: December 23, 2008 - 05:03:20 PM »
    ok, i've ordered a wilwood adjustable proportioning valve from a brake shop.
    cheers guys
    Logged
    Pages: [1]
    « previous next »