Author Topic: painting front end parts  (Read 862 times)

Offline 30below

  • Jr. Member
  • **
  • Posts: 273
painting front end parts
« on: December 19, 2008 - 10:20:47 AM »
I powdercoated a lot of it,but should i paint the tierods,idler arm,pitman arm and lower balljoints?Or just wipe with oil,or clear them?




Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: painting front end parts
« Reply #1 on: December 19, 2008 - 10:46:00 AM »
For the steel natural look I would look into POR 15 metal mask.
You can buy one of those DIY fill whatever you are going to paint aerosol cans. They come empty but have a small canister, pressurized. 
Then just spray the metal mask on parts you want to have a natural look. I did it and the front end parts came out great.
Mike, Fremont, CA.


Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: painting front end parts
« Reply #2 on: December 19, 2008 - 10:57:54 AM »
 :iagree:

That's what I did, great product easy to use.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: painting front end parts
« Reply #3 on: December 20, 2008 - 01:09:36 AM »
I paint them with a cast blast color paint

Challenger - You`ll wish You Hadn`t

Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: painting front end parts
« Reply #4 on: December 22, 2008 - 05:08:05 PM »
http://www.prevalspraygun.com/

Use this and the metal mask. Why?

Because the metal mask is a hard epoxy type of paint. It won't have rust breaking thru later on.
Mike, Fremont, CA.