FREE Parts

[nivvy]

this is a jack stand from my car Free also...... wont ever use and needs retored...

also free power steering pump housing.. the pump is shot... I fried it but the housing just needs a repaint....

just cover shipping.... How do you get the darn housing off.... 

[KNOT0623]

is it for a 70?

please let me know thanks!!!

[nivvy]

ill get pics and numbers today.... been sitting on the garage floor since i started on my car...... 

[nivvy]

Its solid just need cleaned up and works fine.... its 34" long without the stand..... where is the numbers on this thing and I dont know what year its for.... been laying around....... Ill try to answer any questions.....

[nivvy]

more stuff..... 

[bb71challenger]

Sure wish that jack was for a 70-71. I dont know why but E-body jacks are almost always MIA and mine is no exception.

[Chryco Psycho]

the large nut on the rear of the pump with the internal flare fitting has to be removed to get the housing off , beware there is a spring loaded part behind the nut as well

[nivvy]

the large nut on the rear of the pump with the internal flare fitting has to be removed to get the housing off , beware there is a spring loaded part behind the nut as well

yea i took that off but cant get the housing off..... 

[Topcat]

yea i took that off but cant get the housing off..... 

http://www.moparts.org/Tech/Archive/steering/1.html

Should come off with a little persuasion. I rebuilt mine (Federal) and just used a screw driver to pry the halves apart.

[426HEMI]

Did you try a rubber hammer to knock it off?

[nivvy]

Did you try a rubber hammer to knock it off?

Actually im about ready to smash it with my sledge hammer..... 

[440SCOUT]

you have to remove that big nut.. the one where the ps pressure hose connects to.. be careful there is a spring behind it...

[nivvy]

you have to remove that big nut.. the one where the ps pressure hose connects to.. be careful there is a spring behind it...

read above..... lol 

[426HEMI]

I know they are a pain sometimes to get off of there.  Been there and done it several times.  The seal is most likely the problem.   Anyway thought I would say that to see if you did that.