News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Camber Change with Ride Height  (Read 680 times)

    Offline LAA66

    • Sr. Member
    • ****
    • Posts: 1669
    Camber Change with Ride Height
    « on: January 28, 2009 - 11:16:20 AM »
     Just had the front end aligned, set at -.5 degrees camber and now want to raise the front a little bit. Curious how much changing the front end height say 1" would affect the camber (or even toe for that matter). Caster is maxed out at 3.5 pos.
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Camber Change with Ride Height
    « Reply #1 on: January 28, 2009 - 01:06:49 PM »
    everything affects everything , you will probably lose a bit of camber & toe will change how much depends how much you raise it up
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline LAA66

    • Sr. Member
    • ****
    • Posts: 1669
    Re: Camber Change with Ride Height
    « Reply #2 on: January 28, 2009 - 10:22:15 PM »
      The front end settled between the garage and the alignment shop round trip and lost about 1/2" from what looked right to me. I just installed all new components and can only guess they hadn't seated in yet.

     It does have a pull, and the steering wheel is just a bit off center, so I planned to take it back to the shop anyways. I will reset the height before that. :working: Thanks for the response CP.

     
    Logged
    Pages: [1]
    « previous next »