Author Topic: rear sway bar bushing  (Read 1894 times)

Offline tvacuda340

  • Jr. Member
  • **
  • Posts: 82
  • F1A procharger 422 small block
rear sway bar bushing
« on: January 27, 2009 - 11:47:12 AM »
hi
where can I get the bushing to  rear sway bar ( for a 73 cuda ) ..  not the End link bushing ,  but the bushing that are on the frame
hope your know what i mean
  and we still need a danish flag  so .... :wavingflag:




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: rear sway bar bushing
« Reply #1 on: January 28, 2009 - 04:32:35 AM »
energy should ahve a generic bushing that will fit , but you may have to cut the bracket open to get it in there or grease it & pressit in

Challenger - You`ll wish You Hadn`t

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: rear sway bar bushing
« Reply #2 on: January 28, 2009 - 06:51:09 AM »

     I ordered a set of polyurethane bushings based on size & had to trim the lip off & use a vice to press in. 


http://www.cuda-challenger.com/cc/index.php?topic=39789.msg441198#msg441198
  
« Last Edit: January 28, 2009 - 07:24:48 AM by bullitt99 »
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline cwestra

  • Sr. Member
  • ****
  • Posts: 1120
Re: rear sway bar bushing
« Reply #3 on: January 28, 2009 - 07:06:38 AM »
Are the bushings and links the same for front and rear sway bars?
Corey - in Northern Indiana

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: rear sway bar bushing
« Reply #4 on: January 28, 2009 - 07:09:27 AM »
« Last Edit: January 28, 2009 - 07:27:35 AM by bullitt99 »
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline tvacuda340

  • Jr. Member
  • **
  • Posts: 82
  • F1A procharger 422 small block
Re: rear sway bar bushing
« Reply #5 on: February 01, 2009 - 04:29:58 AM »
hi
thanks !!