Roller Rocker Question

Author Topic: Roller Rocker Question  (Read 3823 times)

nivvy

  • Guest
Re: Roller Rocker Question
« Reply #15 on: February 16, 2009 - 11:08:54 PM »
FYI...

Magnum Roller Rockers™ can be used with all High Energy™, Magnum, Xtreme Energy™, Nitrous HP™, Xtreme 4X4™ and Xtreme Marine™ Camshafts as well as any other hydraulic or solid cam WHERE OPEN SPRING PRESSURES DO NOT EXCEED 350 lbs.

Harland sharp is in the 800lbs range  :misbehaving:

Harland Sharp will replace one of there rockers that break for free...


comps are not good for moparmaniacs combo.....  :2cents:
« Last Edit: February 16, 2009 - 11:22:03 PM by StRoKer »




Offline 71chally416

  • Resident
  • *****
  • Posts: 3170
    • The Streetwalker
Re: Roller Rocker Question
« Reply #16 on: February 17, 2009 - 01:28:12 AM »
The Jesels on the race car hold up well with over 1,000lbs open pressure. The only problem we've had is pulling the stands out of the head on a few. We added two extra smaller bolts to the stands and that cured the problem.
Once we had Ronald Reagan, Bob Hope & Johnny Cash. Now we have Obama, No Hope and No Cash!

nivvy

  • Guest
Re: Roller Rocker Question
« Reply #17 on: February 17, 2009 - 05:22:58 AM »
The T&D's we had lasted 5 years and were $1000+ set of rockers..... they started breaking but im wondering if the issue wasnt from shimming the shafts...  :clueless:

However I think that is good value for 5 years of service  :wavingflag:

Offline tactransman

  • Sr. Resident
  • ******
  • Posts: 5401
  • 1973 Challenger- Member here since April 14, 2006
Re: Roller Rocker Question
« Reply #18 on: February 17, 2009 - 11:34:50 AM »
Terry-tactransman 
Torqueflite/Automatic Transmission Specialist
Union, Mo.
Give a man a fish and he eats for a day,teach him to fish and he eats for a lifetime.