Author Topic: Fuel Regulator Install  (Read 650 times)

Offline 73yellowfish

  • Jr. Member
  • **
  • Posts: 175
Fuel Regulator Install
« on: March 16, 2009 - 11:12:07 PM »
hey guys.. i looking to see if you guys having tips or tricks to installing the fuel regulator in the gas tank...

right now im trying.. seal.. regulator.. seal.. lock ring..

and it's not corporating...



 :pullinghair:
'73 cuda
(O [       ]{|||}[       ] O)




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Fuel Regulator Install
« Reply #1 on: March 17, 2009 - 02:08:05 AM »
if you are talking about a fuel sender all you need is the seal in first then the sender , then the lock ring

Challenger - You`ll wish You Hadn`t

Offline pink panther

  • Resident
  • *****
  • Posts: 2547
Re: Fuel Regulator Install
« Reply #2 on: March 17, 2009 - 09:41:29 AM »
if you are talking about the sending unit, I just did mine, I found that the more gas you have in the tank the sending unit wants to float on you and it is hard to allign it. just takes time.
Scott   -  Member since 9/18/2005

Offline 73yellowfish

  • Jr. Member
  • **
  • Posts: 175
Re: Fuel Regulator Install
« Reply #3 on: March 17, 2009 - 10:12:01 AM »
yes... sending unit... i was a bit slow last night.... sorry...ha..

but no second seal eh?

going to try that out..

thanks

dc
'73 cuda
(O [       ]{|||}[       ] O)

Offline pink panther

  • Resident
  • *****
  • Posts: 2547
Re: Fuel Regulator Install
« Reply #4 on: March 17, 2009 - 10:16:04 AM »
Did you turn the ring more? I had 1 small leak on mine and I tightened the ring more and it took care of it
Scott   -  Member since 9/18/2005