Reproduction radiator support assembly question? need 22" can only find 26"

[lime73]

does anyone make a reproduction 22" core support assembly or just the 26". i am going to replace my drivers side inner fender and would like to replace my core support at the same time. i would switch to a wider core but i have already purchased a really expensive aluminum radiator. thanks for all your help, this site rocks and is an absolute must for any ebody owner.

[grimmey71]

try here

http://www.rosevillemoparts.com/advanced_search_result.php?keywords=radiator+support&search_in_description=1&imageField.x=17&imageField.y=9

[ted]

which only shows the 26"

[mopardave]

no one makes the 22 inch left panel, the right is the same for 22 or 26.

[lime73]

Thanks for the input. Hammer and dolly it is along with a little patch and mig.

[lime73]

hey dave, when you say right and left as looking at the car or from in drivers seat? the side i really need is the one in front of the battery.

[73Chally]

Left is typically considered driver side.

[lime73]

so is dave saying the drivers side is the same for 22" and 26"??  to me it looks like the difference would need to be made up on the passenger side panel as its alreadr close to the battery tray on the drivers side. i feel real stupid asking these questions but i would really love to replace the panel on the drivers side as this car took a light hit on that side and that piece no matter how much i hammer on it i cant get it perfect.

[mopardave]

left or right is always referred to as being seated in the car. yes the LEFT panel 22 is the same as 26, the difference is the right panel

[lime73]

dave-  do you guys at roseville have just that left panel piece for sale oor do i have to buy complete core support and remove what i want?  if you do have just that piece what is the price?  i also need the bottom core support piece that spans the two frame rails and a drivers side inner fender what would be the price for those 3 items shipped to 14612. thanks dave your help is priceless to me and everyone here!!!

[mopardave]

unfortunately no, the upper tie bar is already welded to the right and left panels with the lower being loose. the have not serviced the right panel separate yet. not sure if they will. sorry

[1970RTSE]

Juat to clarify, both sides are different when going between a 22" and 26".  Its just that the DS is only about 1/2" off, so the difference isn't noticed once you have the slots in radiator.

[1970RTSE]

Here is a 26" wide opening.  Notice the difference is about 1/2", especially around the square opening.