Author Topic: Looking for plugs and bullet connectors  (Read 779 times)

Offline shadango

  • Resident
  • *****
  • Posts: 3920
Looking for plugs and bullet connectors
« on: August 17, 2009 - 08:55:11 AM »
Trying to use the red/yellow three way plugs under the dash for power...but cant seem to figure out the size for the bullet connectors they should take. All I can find locally are the 16-18 gauge bullets....and they are too small.

Also, I need to find a connector that will work for the stud connector on the cigarette lighter......mine is MIA.

Anyone know this stuff off hand?




Offline 71 DEPUTY

  • Full Member
  • ***
  • Posts: 727
  • IF YOU CAN'T DODGE IT--RAM IT!
    • Cardomain
Re: Looking for plugs and bullet connectors
« Reply #1 on: August 17, 2009 - 09:01:52 AM »
only way I have made it work is to find another old wiring harness- rob it for the stuff.

some others will chime in of maybe where they get theirs!

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Looking for plugs and bullet connectors
« Reply #2 on: August 18, 2009 - 01:19:00 AM »
the aftermarket bullets are a different size , some you can pry open & enlarge them or jamb them in with an extra piece of wire in the plug alreadt to take up the extra room . Or you can steal them from the wreckers out of other cars

Challenger - You`ll wish You Hadn`t